3/4" NPT water heaters anode rod for Suburban water heater 232767
Magnesium anode rod are excellent sacrificial rods, used to protect the inside metal surface of your water heater tank. The magnesium corrodes instead of your tank. Magnesium anode rods tend to be consumed quicker than Aluminum or Aluminum/Zinc/Tin anode rods due to the higher voltage they create during the sacrificial process. Even though Magnesium anode rods normally corrode at a slightly faster rate than most anode rods, dissolved magnesium in water can offer many health benefits.
Water heater anode rod replacement for RV water heaters / Suburban
Anode rods extend the life of a water heater by attracting corrosive elements in the water, protecting your tank and elements from corrosion.
- Water Heater Anode Rod
- For Suburban (Mor-Flo)
- 9-1/2 Inch Length
- Magnesium
- Without Drain
- With English/ Spanish Language Packaging
Type: extruded anode rod
cast anode rod
Extruded Magnesium anode Rod (AZ31)
| Chemical (%) | |||||||||||
| Grade | Mg | AL | Mn | Zn | Ca | Si | Cu | Ni | Fe | Impurities | |
| max | Max | Max | Max | Max | Total | Each | |||||
| AZ31 | balance | 2.5-3.5 | 0.2-1.0 | 0.7-1.3 | 0.04 | 0.05 | 0.01 | 0.001 | 0.002 | 0.3 | 0.01 |
| Open cicuit voltage (-v) | Close Circuit voltage (-v) | Actual capacitance (A.h/g) | Current Efficiency (%) | ||||||||
| 1.53-1.59 | 1.45-1.50 | 1.100 | 53 | ||||||||
| Rod Diameter | Tolerance | Core Diameter | Straightness | Unit weight |
| inches | inches | inches | inches | lbs/ft |
| 0.500 | -0.020 | 0.135 | 0.060 in 2 ft | 0.180 |
| 0.675 | -0.020 | 0.135 | 0.060 in 2 ft | 0.300 |
| 0.700 | -0.020 | 0.135 | 0.040 in 2 ft | 0.324 |
| 0.750 | -0.020 | 0.135 | 0.040 in 2 ft | 0.372 |
| 0.800 | -0.020 | 0.135 | 0.040 in 2 ft | 0.420 |
| 0.840 | -0.020 | 0.135 | 0.040 in 2 ft | 0.456 |
| 0.900 | -0.020 | 0.135 | 0.040 in 2 ft | 0.516 |
| 1.050 | -0.020 | 0.135 | 0.040 in 2 ft | 0.684 |
| 1.135 | -0.020 | 0.135 | 0.040 in 2 ft | 1.068 |
| 2.000 | +/-0.024 | 0.188 | 0.250 in 10 ft | 2.357 |
Cast Magnesium anode Rod (AZ63)
| Chemical (%) | |||||||||
| Grade | Mg | AL | Mn | Zn | Si | Cu | Ni | Fe | Impurities |
| Max | Max | Max | Max | Total | |||||
| AZ63 | balance | 5.3-6.7 | 0.15-0.7 | 2.5-3.5 | 0.3 | 0.05 | 0.002 | 0.003 | 0.3 |
| Open cicuit voltage (-v) | Close Circuit voltage (-v) | Actual capacitance (A.h/g) | Current Efficiency (%) | ||||||
| 1.5-1.55 | 1.45-1.50 | 1.105 | 50 | ||||||
| Rod Diameter | Length | Core type | |||
| mm | As per buyer request | M4 | M5 | M6 | M8 |
| 13 | √ | ||||
| 14 | √ | ||||
| 16 | √ | √ | |||
| 18 | √ | √ | √ | ||
| 20 | √ | ||||
| 21 | √ | √ | √ | ||
| 22 | √ | √ | √ | ||
| 25 | √ | ||||
| 26 | √ | √ | |||
| 28 | √ | ||||
| 32 | √ | √ | |||
| 33 | √ | ||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.