Indoor Rental LED Screen - Broadcast and Television Studio LED Wall Solution
Broadcast and television production environments demand LED displays that meet specific technical requirements that consumer and commercial-grade displays cannot satisfy. The Indoor Rental LED Screen delivers the combination of high refresh rate, wide viewing angle, and color consistency that broadcast studios require.
The 1920-3840Hz refresh rate eliminates scan lines and flicker that appear on standard-refresh-rate displays when captured by professional broadcast cameras—a critical quality issue that can render an entire shoot unusable. The 160-degree viewing angle in both axes is essential for studio environments where the display is viewed from multiple positions simultaneously by camera operators, talent, and floor crew.
The P2.6 model, with its 2.604mm pixel pitch and 147,456 dots per square meter, delivers the resolution needed for 4K and HD broadcast production where cameras may shoot the LED wall at close range.
| Parameter | Specification |
|---|---|
| Pixel Pitch Options | P2.6 / P2.97 / P3.91 / P4.81 (selectable) |
| Module Size | 250 x 250 mm |
| Cabinet Size | 500 x 500(1000) x 84 mm |
| Cabinet Material | Die Casting Aluminum |
| Cabinet Weight | 7 kg (single hand lift) |
| Brightness | Greater than or equal to 800 nits |
| Refresh Rate | 1920-3840 Hz |
| Viewing Angle | H: 160 degrees; V: 160 degrees |
| Grey Level | 12-16 bit |
| Ingress Protection | IP43 |
| Life Time | Greater than 100,000 hours |
| Maintenance | Front and Rear maintenance |
| LED Type | SMD2020 |
| Video Frame Rate | Greater than or equal to 60 Hz |
| Failure Rate | Less than 0.0002 |
| Application | Stage events, car exhibitions, rental displays, corporate events |
- 1920-3840Hz refresh rate for broadcast camera compatibility – Eliminates scan lines and flicker artifacts when captured by professional broadcast cameras at any shutter speed
- 160-degree wide viewing angle for multi-position studio environments – Camera operators, talent, and floor crew all see a consistent, accurate image regardless of position
- P2.6 model with 147,456 dots per square meter for 4K broadcast resolution – Highest pixel density delivers detail resolution required for professional broadcast production
- 12-16 bit grey level for smooth tonal gradation – Fine gradations in dark scenes and skin tones render without visible banding
- IP43 rated for studio environment durability – Protection against dust and light water spray for typical studio environments
- Broadcast studio virtual production backgrounds
- Television news set LED walls
- Live broadcast event production
- Film and commercial production with LED volume stages
- Corporate broadcast studios for internal and external communications
Broadcast camera compatibility is a specialized requirement that most LED display manufacturers do not design for. Standard LED displays typically have refresh rates of 60Hz or 120Hz—adequate for direct human viewing but inadequate when captured by broadcast cameras at shutter speeds of 1/50 second or faster.
At standard refresh rates, the camera's shutter captures the display's refresh cycle as visible scan lines or banding across the image, which is unacceptable in professional broadcast production. The 3840Hz maximum refresh rate on this display exceeds the requirements of professional broadcast cameras, ensuring that even at the fastest shutter speeds, the display renders as a solid, flicker-free image.
The P2.6 model with 147,456 dots per square meter is equally important for broadcast: at typical virtual production camera distances of 2-3 meters from the LED wall, a coarser pixel pitch would produce visible pixel structure that cameras resolve as distracting moire patterns.
- Your inquiry about our products or pricing will be replied within 24 hours
- We provide 2 years warranty and lifelong maintenance
- Flexible delivery options to suit your needs
- Comprehensive product range including Outdoor LED Display, LED Pharmacy Cross Display, LED Flexible Display, Indoor LED Display, LED Gas Price Signs, and Indoor/outdoor LED Signs
- Can the product be customized?
Yes, we can customize according to your requirements. We arrange sampling first, confirm details with you, then proceed with production. - Can I place a sample order to test first?
Yes, we will create a sample list according to your needs. - How to install LED displays?
We provide installation manuals and video instructions. Technical drawings are also available upon request. - How to proceed with an order for LED Screen?
- Share your requirements or application needs
- We provide quotation based on your requirements
- Customer confirms design document and places deposit
- We arrange production
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.