Cooper Split Roller Bearing 01EB65M 65x114.3x55.7 mm Chrome Steel

 Food extruder multi-stage tandem thrust bearings T-2390 factory

Tandem bearings T-2390 with size 23*90*99 mm used for The twin-screw extruder is partially developed on the experience and the knowledge derived from the understanding of single-screw extrusion cooking.

Bearing factory Number:T-2390

Item code:T-2390

Original place:China LuoYang

Lubrication:Oil lubrication

Boundary dimension: 23*90*99mm

Outer diameter D:90mm

Inner diameter d:23mm

The total height:99mm

Tandem stages number:three row stages

Bearing Material:High quality bearing steel

Bearing shaft diameter:0.9” inch size

Bearing outer diameter:3.54”inch size

Bearing width:3.9 inch size

Description:cylindrical roller thrust bearing

UPC/HS code:8482500090

Cage type Nylon or Steel or Brass Standard Cage

Precision grade:P5 P4 grade

C :420KN

CO:1190KN

The package:strong carton

Tandem thrust cylindrical roller bearings have a limited radial cross-section, super axial load capacity, long-term working life and minimum friction loss, so they are obtained in the parallel twin screw extruder gear transmission box in the rubber and plastics industry Very successful application. It will also be popularized and applied in other mechanical equipment.

Tandem bearings have the following structural types:
1.)The basic type tandem bearing is to connect the shaft ring, the seat ring and the roller-cage assembly through the elastic spacer. This type of bearing is a separate structure, the parts can be disassembled, and it must be carefully installed and disassembled according to the numbering sequence provided by our company.

2.)The tandem bearing with shaft is a modified structure bearing. A shaft is inserted in the inner hole of the basic tandem bearing, and the bearing is fixed on the shaft with an elastic lock ring. The bearing parts of this type are inseparable, and it is very convenient to install and dismount the whole bearing during use.

3.)Tandem bearing with sleeve, sleeve is sleeved on the outside of the basic tandem bearing.