67986DW.920.921D rolling neck bearing,four row,206.375x282.575x190.5mm
The 67986DW.920.921D four row tapered roller bearing parameter as follows:
|
Items |
Data |
Unit |
|
Description |
67986DW.920.921D or 802016 four row tapered roller bearing |
|
|
TQO Type |
67986DW.920.921D |
|
|
FAG Bearing code |
802016 |
|
|
Dimension |
206.375x282.575x190.5 |
mm |
|
ID(inner diameter)/Bore |
206.375 |
mm |
|
OD(outer diameter) |
282.575 |
mm |
|
H:Width/Height/thickness |
190.5 |
mm |
|
Cr (Radial Dynamic load rating) |
1500 |
KN |
|
Cor (Radial Static load rating) |
3250 |
KN |
|
factor |
0.51 |
|
|
Weight |
36 |
KGS |
The 67986DW.920.921D or 802016 four row tapered roller bearing details as follows:
|
Component |
two double cones, two single cups and a double cup with a cone spacer and two cup spacers. Spacers have slots or holes for lubrication. Cone spacers are hardened to reduce face wear. Numbered serially to assure correct installation sequence. |
|
Details |
TQO bearings are directly mounted and comprised of two double inner races, two single and one double outer race, with an inner race spacer and two outer race spacers. Slots in the inner race spacer permit lubricant to flow from the bearing chamber to the roll neck. The inner race spacers are hardened to minimize face wear. |
|
Application |
heavy plate mills hot strip mills cold rolling mills skin pass mills roughing mills universal beam mills rod, bar and wire mills |
|
HS Code |
84822000090 |
|
Material |
GCr15SiMn ,G20Cr2Ni4A( carburizing steel) |
|
Packing |
First lubricated, Second circled with plastic film/Kraft paper/blue belt, and then packaged in plywood case, last gathered in Wooden pallet |
|
Delivery time |
In stock, if not available,It will need 20-30 days |
|
Serive and drawing |
Our engineer can design the assembly drawing to you |
67986DW.920.921D or 802016 Four row tapered roller bearing are the one kind of roll neck bearing,their radial and axial loading capacity are high,can carry heavy axial loads in two direction,and their radial loading capacity is 3 times heavier than signle row tapered roller bearing, but limiting speed is lower.They can be used as axial loacating bearing in two direction because they are able to limit axial displacement in two direction within axial clearance.The radial and axial clearance also can be adjusted by changing the width of sapcer betwwen inner and outer rings.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.