four point contact ball slewing bearing 787/1260G2 to France customer,with seal in stock

We had offered the four point contact ball slewing bearing 787/1260G2 to France customer

For the slewing bearing 787/1260G2 the dimension 1509X1260X90mm will used for stacker equipment.

For the four point contact ball slewing bearing without teeth 787/1260G2 material as follows:

Outer ring material:50Mn

Inner ring material:50Mn

Ball:LYC GCr15

Seal:double seal

Oil hole distribute circle equally

Mounting hole equally space

Specifications

The advantage of our bearings:
1.ISO 9001:2008
2.R&D capability.
3.High precision
4.Good quality and best service

5. Reasonable price and quick delivery
6.Long life and low noise

787/1260G2 slewing bearing application Manual

1.Slew bearings should be placed horizontally when transport or keep for storage.

2.Only open the package when the bearing is to be mounted for use,and at that time the bearing should be filled up with operating grease after rust-resisting oils are cleaned up.

3.Each part of the bearing can not be exchanged between sets and rows in assembled bearings.Pay special attention to assemble the bearing as the same original design while disassembling for cleaning.The split rings should be mounted by fitting with the original drilling holes.

4.The mounted bearing must be axially located when radial load goes beyond about 10% of axial load,the fitted parts of radial location should be conformed to the relative standard.