Panel Glazed Tile Roll Forming Machine One Complete Chain with Decoiler 5-8m/min
1. Specification of the material
| 1 | Suitable Material | Colored Steel plate, Galvanized steel |
| 2 | Width of the raw material | 1200mm |
| 3 | Thickness | 0.4-0.6mm |
2. Machine Detailed Parameters
| 1 | Roll Forming Machine | YX40-180-900
|
| 2 | Machine structure
|
Wall panel structure
|
| 3 | Total power |
Motor power-7.5kw servo motor Hydraulic power-5.5kw |
| 4 |
Roller stations
|
About 19 stations |
| 5 |
Productivity
|
5-8m/min |
| 6 |
Drive system
|
By chain, one complete chain |
| 7 |
Diameter of shaft
|
￠70mm solid shaft |
| 8 | Voltage
|
380v 50Hz 3phase |
| 9 |
Color Of The Machine
|
Yellow and blue |
| 10 |
Container need
|
40GP container |
| 11 |
Deliver Time
|
70 days |
| 12 |
Terms Of Payment
|
30%T/T 70% pay before shipment |
3. Profile drawing
4. The Chart of Process Flow
5. Specification of Components
(1) 5T Hydraulic Un-coiler
- Width of feeding: 1250mm
- Capability: 5 Ton
- Inter diameter: 470-520mm
- Maximal out diameter: 1500mm
- Main motor power: 5.5KW AC motor
- Hydraulic power: 4kw
(2) Coil Car
- Capacity: 5 ton
- Track guide length: 3m
- Can go forward and raise up to load the coil into the un-coiler
(3) Main Roll Forming Machine
- Roller material:ASTM1045 chrome plated surface with chrome
- Shaft diameter: ￠70mm material: SAE1045 with quenching and tempering
(4) Machine Structure
- Main frame by 350H beam welding
- Machine structure: wall panel
(5)Pressing System:
- Pressing after forming: Press the sheet after roll forming to required length
- Hydraulic drive uses the same hydraulic unit with cutting
- Material of mold:Cr12, 58-62 HRC hardness
- Pressing by hydraulic, 5.5KW
(6) Hydraulic cutting system
- Cutting after forming: Cut the sheet after roll forming to required length
- Uses two hydraulic cylinders for operation.
- Material of blade:Cr12, 58-62 HRC hardness
- Cutting power by hydraulic,5.5KW
- Working pressure: 12Mpa adjustable
- Length measuring: Automatic encoder length measuring
- Tolerance of length: +/- 1.5mm for each piece end product
(7) Computer Control Cabinet
- Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- PLC: Panasonic or customerization
6.Installation and training:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
C.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
7.After Service
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.If there is any problem found of the machine, we will repair it for free in one year.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.