LYSAGHT KLIP-LOK 700 Roll Forming Machinery Manufacture for Sale

LYSAGHT KLIP-LOK® 700 is a new generation, widecover, concealed fixed cladding. Made of high tensile steel of 550 MPa yield strength, it has a wider span, with better uplift performance than all available comparable profiles. Visually, you get a bold rib that makes a strong statement rising from the flat pans that are cross micro fluted.

Our extensive research shows that thermal expansion and contraction can be controlled better using a concealed fixed system. Since the effect is on the longitudinal direction, wider coverage of LYSAGHT KLIP-LOK® 700 provides the best alternative. It is well suited to both general environment and coastal environment.

The profile is fixed on a specially designed clip known as KL-70, manufactured from high tensile steel base and designed tower to withhold high wind pressure. This provides accuracy, economy and ease during the installation and makes it a superior product designed to last long.

LYSAGHT KLIP-LOK® 700 - Design Advantages

Wide cover concealed fixed cladding system with no exposed fastener for weather tight roofs

Bold ribs make strong visual appeal

Fixed on a specially designed clip to withhold high wind pressure

Economical and fast to install l Available with on-site mobile roll forming for long uninterrupted length and low roof pitch

Appealing architectural appearance and multiple colour choice

 1. Specification of the material

 
2. Machine Detailed Parameters

 
3. Profile drawing

 
4. The Chart of Process Flow
 
Hydraulic Uncoiler—Roll Forming—Cutting—Out table

 
 
5. Specification of Components
 
(1) 5T Hydraulic Un-coiler

• Width of feeding: 1250mm
• Capability: 5 Ton
• Inter diameter: 470-520mm
• Maximal out diameter: 1500mm
• Working speed: 0--20m/min adjustable
• Main motor power: 5.5KW AC motor
• Hydraulic power: 4kw

 
(2) Main Roll Forming Machine

• Roller material:ASTM1045 chrome plated surface with chrome
• Shaft diameter: ￠70mm material: SAE1045 with quenching and tempering
• Main frame by 350H beam welding
• Machine structure: wall board

 
(3) Hydraulic cutting system

• Cutting after forming: Cut the sheet after roll forming to required length
• Material of blade:Cr12, 58-62 HRC hardness
• Cutting power by hydraulic,4KW
• Working pressure: 12Mpa adjustable
• Length measuring: Automatic encoder length measuring
• Tolerance of length: +/- 1.5mm for each piece end product

 
(4) Computer Control Cabinet

• Programmable setting of profile length and quantity
• Operating system language: English and Chinese
• Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved

• PLC: Panasonic or customerization