Lab Salt Spray Test Chamber Model Number: IE4490L Temperature Range RT 5C-60C Continuous Spray
Salt Spray Test Chamber Model Number: IE4490L Temperature Range RT 5C-60C
Salt Spray Test Chamber
Model Number: IE4490L
Product Description and Applications:
The Salt Spray Test Chamber is to simulate the dispersion system composed of tiny salt-containing droplets in the atmosphere, which is widely used in electronic, electrical and automobile, motorcycle, hardware, plastic, FPC soft board, and other industries after electroplating, painting, coating, anodic treatment of salt spray corrosion test to evaluate its surface corrosion resistance
Features:
- The test supplement is hidden, no need to open the lid filling. At the same time, there is a water level observation window on the side, which is convenient for cleaning.
- A special glass nozzle is used to spray the water pipe with a brine filter, which can be used for 4000 hours without crystalline salt blockage.
- The control components are selected from well-known brands, and the structure of upper and lower water and electricity separation is adopted to avoid safety hazards, prevent circuit corrosion and aging, maximize the service life of electrical components, and make maintenance easier.
- According to the customer installation site can be manually and automatically add water, easy to use.
- Continuous spray and intermittent spray can be quickly and freely switched, easy to operate
Technical Parameters:
| Model number | IE4490L | |
| Laboratory temperature range | RT+5℃~60℃ | |
| Pressure barrel temperature range | RT+5℃~70℃ | |
| Temperature fluctuation | ±0.5℃ | |
| Temperature uniformity | ≦1.0℃ | |
| The amount of salt spray settling | 1～3ml/h.80cm2 | |
| Spray pressure | 1.00±0.01kgf/cm² | |
| Spray method | Continuous spray + intermittent spray | |
| Effective inner volume of the test | 270L | |
|
Interior dimension: WxHxD(mm) |
900*600*500 | |
|
Carton size: WxHxD(mm) |
1400*850*1100 | |
| Box structure |
●The inner and outer boxes of the laboratory: the inner and outer boxes of the laboratory are made of grade A PVC polyvinyl board, the thickness of the whole machine is 8mm, and the acid and alkali resistance and temperature resistance to 78℃. ●Laboratory seal cover: The seal cover of the laboratory is made of grade A PVC plate, the thickness is 8mm, the surrounding reinforcement is 13mm, and the acid and alkali resistance and temperature resistance are 78℃ |
|
| Open cover system | Manual opening | One-click automatic cover opening |
| Water refill method | Automatic/manual dual water supply mode, automatic water inlet with a set of water purifier | |
| Sample Stand | The laboratory basket frame adopts a plane indexing frame, the placing Angle is 15 degrees and 30 degrees, and on all sides the direction of falling fog and receiving fog is completely the same. | |
| Safety protection device |
●When the salt water is low, the heater power is automatically cut off ●When the temperature exceeds, the heater power supply is automatically cut off ●When the laboratory water level is low, the heater power supply is automatically cut off |
|
| Power Supply | AC220;V50Hz;2.5KW | |
Applicable Standard:
GB/T242317-2008 salt spray test method
GB/T242318-2000 "Basic Regulations of Electrical and Electronic products Test Ka"
GB / T10125-1997 Artificial atmosphere corrosion test salt spray test
GB/T10587-2006 Technical conditions for salt spray test chamber
GB105932-1990 Method for measuring environmental parameters of electrical and electronic products
GB / T1765-1979 Paint film test for determination of resistance to heat, moisture, salt spray and weather (artificially accelerated)
GB/T242317-1993 "Electronic and electrical products basic environmental test procedures Test Ka: salt spray test method"
Support and Services:
We provide technical support and service for our Salt Spray Test Chamber products. Our technical support team is available to answer any questions you may have about our products and their functionality. We can provide assistance with installation, troubleshooting, maintenance, and other product-related questions. We also offer a variety of service options, including on-site repair, calibration, and preventive maintenance.
Packing and Shipping:
- Protect the Salt Spray Test Chamber with foam padding and appropriate packaging materials.
- Package the Salt Spray Test Chamber in an appropriate box or carton.
- Use appropriate shipping methods to ensure the Salt Spray Test Chamber reaches its destination safely.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.