C041 Soil site cross plateshear vane test, Four-bladed Vane Shear Tester,portable shear vane tester
shear vane test
| parameter | details |
| Cross board size | ¢75mm×150mm ¢50mm×100mm |
| Steel ring maximum allowable button space | 800N.m precision 0.55N.m Turbine indexing instructions 1.25° per gradutaion |
| Leader | ¢30mm×1040mm |
| 5,dial indicator | range 0-10mm division value 0.01mm |
-It is used to measureNatural shear strength of saturated soft clay on site.
-Test:Press cross slab head equipped with four blades into depth of the reservation, And cross slab head rotation, measure -The resistance of the cylindrical surface is required formed by Vane shear head.Then put the equivalent resistance of shear resistance on the surface of the cylindrical units
-Due to the equipment in the determination of strength index in drilling need to use with drilling equipment, generally can do within 30 m shear test
-Cross plate drilling rod should have sufficient strength under the condition of full load , in order not to make the drilling rod distorted, or Torque Angle of rotation curve must be amended
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.