Environmentally friendly constant temperature and humidity test chamber

Product volume (L): 64L/80Z/100L

Inner size (H*W*D) cm: (three boxes)

3. Temperature adjustment mode: BTHC mode (balanced temperature adjustment and humidity control mode)

4. Working environment temperature: 5~35 degrees

5. Heater: Nichrome electric wire heater

6. Humidifier: shallow trough heating humidifier

Environmentally-friendly constant temperature and humidity test chamber 1. Internal and external box material:

Inner box: mirror stainless steel plate

Outer box: stainless steel or steel plate spraying

2. Insulation material: hard polyurethane foam glass wool

3. Controller: Japan OYO or South Korea TEMI human-machine interface touch screen controller

4. Refrigeration system: France Taikang fully enclosed compressor / environmentally friendly refrigerant

5. Protection device: Compressor overheating, overcurrent, overpressure, heating humidification, empty burning, over temperature in the tank, water shortage alarm system

6. Power supply: 220VAC ± 10%

7. Standard configuration: observation window (indoor lighting), diameter 50mm cable hole (on the left side), sample holder two sets (height adjustable)

Standard configuration:

1. Power cord 4.0 mmx4 core, low impedance rubber cable 2.5m long and 1 strip

2. One RS-232C communication interface terminal (9PIN)

3. Stainless steel SUS #304 square punching steel plate rack 2 pieces

4. Stainless steel adjustable spacing 40mm rack track 2 sets

5. 11W energy-saving lighting window light

6. One 50mm test hole on the left side of the machine, one stainless steel hole cover and one silicone plug.

7. Standard test non-woven fabric 5 pieces

8. A set of fuses (wear parts)

9. One set of controller instruction manual, one set of operation instructions, one test report