ZCQ150 Earth Tech Vibro replacement -stone columns Vibroflot Equipment
Vibro-Replacement is the process of constructing stone columns using a vibratory probe (vibroflot). After the vibroflot penetrates to the desired depth of treatment, stone fill is deposited into the hole from the ground surface or through feed tubes to the tip of the vibroflot as it is withdrawn. Repeated raising and lowering ("plunging") of the vibroflot into the stone during withdrawal results in columns of stone measuring 30-42" (750-1100mm) in diameter. As with vibro-replacement, stone columns results in higher bearing capacities for shallow foundations, a reduction in total and differential settlement, increased safety factors for slope stability, and mitigation of liquefaction potential in seismically active areas. Vibro-replacement is often an economical alternative to deep foundations, especially when considering the added liquefaction protection in seismic areas.
Vibro Replacement is a method of constructing stone columns through fill material and weak soils, to improve their load bearing and settlement characteristics. Vibro Replacement provides an economic and technically sound solution to a wide range of geotechnical and foundation problems.
| specification | ZCQ45 | ZCQ55 | ZCQ75 | ZCQ100 | ZCQ130 | ZCQ150 | ZCQ180 | ZCQ240 | ZCQ300 | ||
| Vibro Motor |
rated power | kw | 45 | 55 | 75 | 100 | 130 | 150 | 180 | 240 | 300 |
| Rotating speed | r/mim | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | |
| Current Rating | A | 86 | 110 | 150 | 196 | 256 | 291 | 350 | 475 | 590 | |
| Vibration move machine body |
Vibration frequency | HZ | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 |
| Moment | N.m | 47 | 56 | 69 | 78 | 88 | 96 | 106 | |||
| Exciting force | kN | 110-200 | 130-235 | 180-325 | 190-350 | 210-380 | 230-429 | 280-506 | 325-588 | 380-687 | |
| Empty vibration amplitude | mm | ≥18 | ≥16 | ≥15 | ≥15 | ≥16 | ≥18 | ≥21 | ≥23 | ≥26 | |
| Empty LO current | A | ≤35 | ≤40 | ≤50 | ≤60 | ≤70 | ≤80 | ≤90 | ≤120 | ≤150 | |
| The outer diameter of the body | mm | 351 | 377 | 426 | 426 | 426 | 426 | 426 | 480 | 480 | |
| Body length | mm | ≤2230 | ≤2465 | ≤2600 | ≤2750 | ≤2860 | ≤3000 | ≤3150 | ≤3100 | ≤3200 | |
| The total mass | kg | 1000 | 1350 | 1800 | 1950 | 2200 | 2300 | 2400 | 2550 | 2660 | |
Mixed and fine-grain soils frequently have an insufficient bearing capacity and stiffness. Should the fine grain share be around 5% higher, an adequate self-compaction is no longer to be expected. This is where the vibro replacement compacting comes into question as an improvement. This process is also suitable for the improvement of coarse-grain backfills comprising rubble, slag or overburden.
A special area of application are vibro drain columns. Flotation is dispensed with hereby. The column then merely acts as a drain.
The vibro replacement
In most cases, a bottom feed vibrator is used, with which a coarse-grain fill material is discharged at the tip of the vibrator with compressed air support. The vibrocats with a leader that have been designed by Keller provide an additional pull-down pressure to be applied when the vibrator is being lowered and is compacting.
In vibro replacement compacting, the work is carried out in alternate steps. The gravel or crushed stones that are discharged from the vibrator hub are compacted and displaced into the soil at the side. This results in the formation of replacement columns that bear the loads in connection with the soil. The creation parameters are digitally recorded in the device.
ZCQ series variable frequency electric drive Vibroflot technical parameters
| specification | ZCQ45 | ZCQ55 | ZCQ75 | ZCQ100 | ZCQ130 | ||
| Vibro Motor |
rated power | kw | 45 | 55 | 75 | 100 | 130 |
| Rotating speed | r/mim | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | 1450 (1950) | |
| Current Rating | A | 86 | 110 | 150 | 196 | 256 | |
| Vibration move machine body |
Vibration frequency | HZ | 24 | 24 | 24 | 24 | 24 |
| Moment | N.m | 47 | 56 | 69 | 78 | 88 | |
| Exciting force | kN | 110-200 | 130-235 | 180-325 | 190-350 | 210-380 | |
| Empty vibration amplitude | mm | ≥18 | ≥16 | ≥15 | ≥15 | ≥16 | |
| Empty LO current | A | ≤35 | ≤40 | ≤50 | ≤60 | ≤70 | |
| The outer diameter of the body | mm | 351 | 377 | 426 | 426 | 426 | |
| Body length | mm | ≤2230 | ≤2465 | ≤2600 | ≤2750 | ≤2860 | |
| The total mass | kg | 1000 | 1350 | 1800 | 1950 | 2200 | |
Previous project pictures
China Sinopec Hainan commercial crude oil reserve base project
HZMB Island tunnel project
China Sinopec Caofeidian crude oil commercial reserve base library project
International market
Companies based in China, the world. Actively explore the international market, international sales companies are mainly concentrated in Africa, the Middle East and Asian countries, including: Benin, Sri Lanka, Indonesia, Malaysia, Algeria and other countries, and high customer credibility and visibility.
1, Chinese Embassy in Benin project equipment procurement negotiations
Indonesia Port and foundation construction of offshore Vibro
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.