F003 Steel truss structure large structure test system

Multifunctional structure test system

It is used for the performance evaluation and analysis test of various beams, columns, nodes, walls, frames, shear, compression, rebound, creep, and fatigue durability. Used in teaching and research, design and manufacturing, and construction.

Features

The main frame is a double-door frame structure, and the loading beam can adjust the sample loading space up and down along the column. The actuator (cylinder) is installed under the middle bearing plate of the beam. Horizontal loading (shearing) is installed on the side of the reaction frame. When the sample is loaded vertically, the horizontal loading follows the polished rod to ensure that the vertical loading and horizontal loading are loaded at the same time.

Component:

Servo oil source, servo actuator, static and dynamic acquisition system, sensor
Servo oil source process 200L/min; 400L/min; 800L/min optional (note: flow rate is related to dynamic force)
Overload leakage protection device, oil temperature alarm system, water cooling system, oil return and oil return pressure adjustment and decompression fine-tuning system
Servo actuator stroke; 200mm; 400mm; 600mm optional
Actuator displacement stroke sensor accuracy 0.1mm
Static and dynamic acquisition system: adjustable stress and strain. Test load signal sine wave. Channel 1-7 channel optional
Force sensor (optional): 200KN; 500KN; 1000KN; 3000KN accuracy ±1%; continuous work ≥500H
Voltage: 380V±10% 50HZ
Power: 40KW; 90KW; 120KW
Loading frame: height 9m; width 3m; length 6m high-strength steel structure; specifications can be made according to requirements
The size of horizontal loading frame, distribution beam and support frame are optional.