AS2211F-02-10SA New SMC Pneumatic Joint AS2211F-02-10SA New Sealed
SMC AS2211F-02-10SA Meter-In Elbow Speed Controller
Pneumatic Motion Applications
The SMC AS2211F-02-10SA controls incoming airflow to a pneumatic actuator. Application areas include packaging machinery, automated assembly, and material handling equipment with meter-in control circuits.
Adjust and Lock
The needle adjustment sets airflow to regulate actuator speed. A push-lock knob secures the setting after adjustment. Its elbow layout routes tubing at a right angle to the threaded port.
Connection and Operating Data
| Parameter | Specification |
|---|---|
| Brand | SMC |
| Model | AS2211F-02-10SA |
| Control Direction | Meter-in |
| Body Style | Elbow |
| Adjustment | Push-lock knob |
| Port Thread | R 1/4 |
| Tube Outside Diameter | 10 mm |
| Tube Connection | One-touch fitting |
| Thread Seal | With sealant |
| Working Fluid | Air |
| Operating Pressure | 0.1–1.0 MPa |
| Proof Pressure | 1.5 MPa |
| Ambient and Fluid Temperature | −5 to 60°C, no freezing |
| Compatible Tubing | Nylon, soft nylon, polyurethane |
Installation Essentials
Check the flow-direction symbol before installation. Insert the tube fully and verify retention. Adjust speed gradually, then lock the knob. Keep operating pressure within the limits of both the controller and the selected tubing.
FAQ
Q1: Does this model control inlet or exhaust airflow?
A: It meters airflow entering the actuator.
Q2: What tube size does it accept?
A: Tubing with a 10 mm outside diameter.
Q3: What thread does it use?
A: R 1/4 tapered pipe thread with sealant.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.