2-Port 100GBase-QSFP28 Integrated Line Processing Unit (LPUI-240)

Price Negotiable

Price: $

MOQ: 1

Delivery Time: 2 WEEKS

Brand: HW

Product Description

Table 10-1588 Board attributes

Attribute	Description
Board name silkscreen	LPUI-240 2x10GBase-QSFP28
Description	2-Port 100GBase-QSFP28 Integrated Line Processing Unit (LPUI-240)
BOM	03057484
Model	CR5D00E2ND70

Table 10-1589 Mapping products and versions

Product	Minimum Version Requirement
NE40E-X8	V800R010C00
NE40E-X16	V800R010C00
NE40E-X8A	V800R010C00
NE40E-X16A	V800R010C00

Table 10-1590 Buttons

Name	Description
OFL	Before removing a board, press and hold the OFL button for about 6 seconds until the OFL indicator turns on. Then, you can remove the board.
Breakout	When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling.

Table 10-1591 Indicators

Name	Description
OFL (red)	If this indicator is steady on, you can remove the board.
RUN (green)	If this indicator blinks every 2 seconds (0.5 Hz), the system is running properly. If this indicator blinks twice each second (2Hz), the device is starting and has not completed registration.
L/A (green)	If this indicator is steady on, the link is Up. If this indicator is blinking, data is being transmitted and received. If this indicator is steady off, the link is Down.
0 to 3 100GE Breakout (green)	Breakout 0-3: breakout indicator. If breakout indicator X is on, the interface indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, interface indicators are showing the running status of breakout channel 0 (if an interface indicator is blinking, breakout channel 0 on this interface is receiving and transmitting data); if breakout indicator 1 is on, interface indicators are showing the running status of breakout channel 1. If the board has breakout interfaces, each breakout indicator for channels 0 to 3 turns on for 5s in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each interface, press the Breakout button to have breakout indicator 1 turns on.

Table 10-1592 Service interfaces

Interface Name	Interface Type	Connector Type	Description	Cable
0 to 1	10G LAN/WAN or 40GE or 100GE	QSFP28/QSFP+	Interface for inputting and outputting 10G LAN/WAN or 40GE or 100GE optical signals	Optical fiber

Table 10-1593 Functions and features

Functions and Features	Remarks
Line-Rate capability	Provides two 100GE interfaces for line-rate transmitting and receiving.
Whether interface splitting is supported	Yes To enable interface splitting, run the port split command to complete interface splitting configuration.
Reliability and availability	Hot swappable.
Restrictions and remarks	All the four 10GE interfaces split from one interface must work in the same LAN or WAN mode(The interfaces working in WAN mode can function only as master interfaces).

Table 10-1594 Interface specifications

Attribute	Description
Optical type supported	100Gbps QSFP28 optical module 40Gbps QSFP+ optical module
Working mode	Full-duplex
Compliant standard	IEEE 802.3
Frame format	Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Table 10-1595 Board specifications

Item	Specification
Dimensions (H x W x D)	40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x 21.09 in.)
Typical power consumption	312.0 W
Typical heat dissipation	1012.3 BTU/hour
Weight	10.0 kg (22.05 lb)
Ambient temperature	Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms: -5 °C to 55 °C (23°F to 131°F)