Low Noise And Vibration Small Ps-130 Automatic Electric Pumps 0.25HP/0.18KW
Low Noise And Vibration Small Ps-130 Automatic Electric Pumps 0.25HP/0.18KW
Self Priming Pump APPLICATIONS:
The automatic booster system consists of a water pump, an airtight pressure tank, and a pressure switch. The specially designed structure makes it a better appearance and performance. The pressure tank with a non-toxic rubber membrane, a pressure vessel, has been pre-filled with an air pressure of about 0.12 Mpa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic appliances and industrial applications and ensure enough water to supply all user outlets.
STRUCTURAL CHARACTERISTICS:
| Main Specification | Standard | Optional |
| Transmission medium | Clean Water | |
| Pump body | Cast Iron | |
| Impeller | Brass | |
| Motor housing | Aluminum | |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by a high-speed punching machine. 2. 100% high-quality copper wire | |
| Front cover | Cast Iron | A Brass plate embedded to avoid impeller jam |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| Thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction Lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC | ||
Self Priming Pump TECHNICAL DATA:
| Model | Output | A | R.P.M. | Q.Max | H.Max | S.Head | Pipe Dia | LxWxH | N.W. |
| HP / KW | 1~220V | (l/min) | (m) | (M) | (mm) | (Kg) | |||
| PS-126 | 0.25 / 0.18 | 1.48 | 2850 | 36 | 33 | 9 | 1"x1" | 310x230x290 | 9 |
| AUTOPS-130 | 0.25 / 0.18 | 1.48 | 2850 | 36 | 33 | 9 | 1"x1" | 310x230x290 | 9 |
Other voltages and frequencies available on request
Self Priming Pump ADVANTAGE:
100% a high-quality copper,100% output
Cold-rolled silicon steel sheet by a high-speed punching machine
Good quality bearing, the surface more smooth, the dimension more precise
Thermal protector
One year warranty
GUARANTEE:
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.