Scm2 Electric Motor Water Pumps For Houses Industrial Centrifugal Pumps
SCM2 Electric Motor Water Pumps For Houses Industrial Centrifugal Pumps
APPLICATION
The SCM2 series are with two back-to-back impellers. It is used for high head values but is hard to reach with a single impeller centrifugal pump.
Suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers, and loading extremely. These electric motor water pumps should be installed in a covered area, protected against the weather.
TECHNICAL DATA
| Model | Output | A | R.P.M. | Q.Max | H.Max | S.Head | Pipe Dia | LxWxH | N.W. | |
| HP / KW | 1~220V | (l/min) | (m) | (M) | (mm) | (Kg) | ||||
| SCM2-45 | 1 / 0.75 | 5.2 | 2850 | 90 | 40 | 9 | 1"x1" | 380x210x240 | 18.8 | |
| SCM2-52 | 1.5 / 1.1 | 7 | 2850 | 105 | 50 | 9 | 1.25"x1" | 415x255x320 | 23.5 | |
| SCM2-60 | 2.0 / 1.5 | 9.6 | 2850 | 130 | 55 | 9 | 1.25"x1" | 415x255x320 | 24.5 | |
| SCM2-68 | 3.0 / 2.2 | 13.5 | 2850 | 150 | 65 | 9 | 1.5"x1.25" | 480x290x350 | 31 | |
Other voltages and frequencies available on request
MATERIAL
Pump body: Cast Iron
Impeller: Brass
Mechanical Seal: Carbon/Ceramic/Stainless Steel
OPERATING LIMITATIONS
Max ambient temperature up to 40℃
Max fluid temperature up to 80℃
Max pressure up to 10 bar
STRUCTURAL CHARACTERISTICS
| Main Specification | Standard | Optional |
| Transmission medium | Clean Water | |
| Pump body | Cast Iron | |
| Impeller | Brass | Noryl PPO |
| Electric Motor housing | Aluminum | |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by a high-speed punching machine. 2. 100% high-quality copper wire | |
| Front cover | Cast Iron | |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| Thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC | ||
Electric Motor Water Pump ADVANTAGE
- 100% high-quality copper,100% output
- Cold-rolled silicon steel sheet by a high-speed punching machine
- Good quality bearing, the surface more smooth, the dimension more precise
- Thermal protector
- One year warranty
Electric Motor Water Pump GUARANTEE
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
OUR SERVICE
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services from designing, printing to processing. Customers can provide the design according to your request and sample making. Also, we can advise how to make the products according to customers' target prices.
FAQ
1. Q: What’s the MOQ?
A: Trial sample order is ok.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: How can I get the pump?
A: Usually, we suggest express for samples. If the volume reaches 1m³, the Seaway will be better.
5. Q: What’s the warranty period?
A: 1 year.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.