0.75HP 1hp Electric Water Pump Centrifugal Single Stage Sprinker Type DK/DKM
0.75HP 1hp Electric Water Pump Centrifugal Single Stage Sprinker Type DK/DKM
Centrifugal Water Pump Description:
DK/DKM pumps are specifically designed to achieve high delivery rates with low to medium heads for industrial and agricultural use. Two flanges with screws make its installation and maintenance simple and easy. Its volute and impeller make it able to pump water that is even fairly dirty. High delivery rates under a continuous or heavy-duty, making them advantageous for rain and gravity irrigation, for pumping water from lakes, rivers, wells, and for a wide variety of industrial uses where high delivery rates must be achieved at low to average heads.
Application:
- Residential irrigation system
- Commercial irrigation system
- New irrigation systems
- Drip Irrigation
Working conditions
Potable water or other clean, thin, or non-aggressive liquids
The PH value of the medium is between 6.5-8.5;
The volume ratio of solid impurities in water does not exceed 0.1%, and the particle size is not greater than 0.2mm;
The power frequency is 50Hz, the voltage is single-phase 220V / three-phase 380V, and the voltage fluctuation range is 0.9-1.1 times the rated value;
You must drain the air in the pump before use. Otherwise, the pumping cannot be performed normally.
Max Temperature of Fluid up to+80oC.
Max Pressure:10bar.
Max Ambient Temperature up to40oC.
Technical data:
| Model | Output | A | R.P.M. | Q.Max | H.Max | S.Head | Pipe Dia | LxWxH | N.W. |
| HP / KW | 1~220V | (l/min) | (m) | (M) | (mm) | (Kg) | |||
| 1.5DKM-16 | 0.75 / 0.55 | 4 | 2850 | 180 | 16 | 9 | 1.5"x1.5" | 320x180x210 | 9.9 |
| 1.5DKM-20 | 1 / 0.75 | 4.8 | 2850 | 240 | 20 | 9 | 1.5"x1.5" | 320x180x210 | 12 |
| 2DKM-16 | 1.5 / 1.1 | 6.2 | 2850 | 480 | 21 | 9 | 2"x2" | 380x235x250 | 23 |
| 2DKM-20 | 2.0 / 1.5 | 9.4 | 2850 | 540 | 23 | 9 | 2"x2" | 380x235x250 | 25 |
Structural characteristics:
| Main Specification | Standard | Optional |
| Transmission medium | Clean Water, sewage water, and fluids | |
| Pump body | Cast Iron | |
| Impeller | Brass with centrifugal radial flow | |
| Motor housing | Aluminum | |
| Stator&Rotor | 1.Cold-rolled silicon steel sheet by high-speed punching machine. 2. 100% high-quality copper wire | |
| Front cover | Cast Iron | |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| Thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC | ||
Our service:
1). We are happy that the customer gives us some suggestions for price and products.
2). Any questions, please let us know it in the first by E-mail or Telephone. We can deal with them for you in time.
3). Offer our customers the lowest prices. Streamline the buying and paying processes.
4). Deliver goods to our customers all over the world with speed and precision.
5). Ensure the excellent quality of our products.
6). 12 months FREE warranty.
7). Accept OEM
Centrifugal Water Pump Guarantee:
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
FAQ:
1). Q: How about the MOQ?
A: Usually, it is 50 PCS for each model.
2). Q: Are you a factory or a trading company?
A: we make water pumps, motors, alternators, and diesel generators since 2006.
3). Q: Can you accept to use our logo?
A: Yes, we can. Any OEM is welcome!
4). Q: What are your payment terms?
A: 30% deposit by T/T in advance, pay 70% balance against B/L copy.
5). Q: How about the delivery time?
A: Usually, 10-30days. But it depends on your order quantity.
6). Q: How about the warranty?
1 year.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.