3 Phase Induction Motor

MS series three-phase asynchronous motor is a Y series motor. The upgrading of product is the enclosed, fan-cooled induction motor for general purpose.

The product applies to economic lake-off fields, such as machine tools, water pumps, fans, compressors, also can be applied to transportation, stirring, printing, agricultural machinery, food, and other kinds of excluding flammable, explosive, or corrosive gas.

MS series three-phase asynchronous motor installation size and power grade in conformity with relevant standards of IEC, its shell protection grade for IP54, a cooling method for IC41l, operate continuously (S1). It uses F insulation class and grade B assessment according to temperature (except for 315 L2-2, 4355 all specifications F grade the assessment and ask the assessment load noise index.

MS series three-phase asynchronous motor the rated voltage is 380 V. rated frequency is 50 Hz. 3 KW, the following connection is Y; other powers are delta connections. Motor running the place at no more than 1000 m; Environment air temperature changes with seasons, but no more than 40 °C; Minimum environment air temperature is-15 °C; The wet month average high relative humidity is 90%; At the same time, this month is not higher than the lowest average temperature 25 °C.

3 Phase Induction Motor Main Features

Ambient temperature: -15 degrees centigrade ~40 degrees centigrade

Altitude: not more than 1000 meters

Rated voltage: 380V, 400V, 415V, 660V

Rated power: 50HZ, 60HZ

Connection: the rated power is 3KW, and the following motor is Y connected. The rated power is 4KW, and the motor is a triangular connection.

Working system: continuous working system (S1)

Protection grade: IP54/IP55

Insulation grade: F grade

Center height of the seat: 80mm-400mm

Product weight: 70Kg-700Kg