Item No.: RS-L40W

 Explosion-proof water Chillers from China/explosion-proof central water chiller/ Explosion-proof screw chiller
 
E-mail: 15113320579@vip.126.com
 
Home Page

Description of the Explosion-proof central water chiller,

Explosion-proof chiller is special chiller system, mainly used in flammable, explosive and other special conditions, for example: to purify and adjust ambient temperature (to cool down or heat up) in production of petroleum, Chemical, metallurgical, pharmaceutical and defense industries, where the air is with explosive mixtures. The chiller system unit mainly includes: explosion-proof compressor, heat exchangers, explosion-proof four-way solenoid valve, encapsulation type pressure switch, explosion-proof electric motors and explosion-proof electrical control box. Models range from 30HP to 720HP, customizable according to customer requirements.

  
 

 
Foundation and Installation of the water cooled central water chillers,
 

Selection of Installation Environment,

1)           Please select a firm and solid ground which can fully support machine when running. The ground selection has also to avoid any happens of vibration and loudly environment.

2)           The    machine should be installed on a place without any exposures from wind, rain, sunlight, or any heat source occurrence.

3)           Ambient   temperature is from 0℃ to 40℃. Relative Humidity (RH) is within 75%.

4)           The    installation environment should be well ventilated and less dust.
When install, please preserve a maintenance space, as shown blow. For the cleaning of the condenser, please reserve space of 0.8L on the left or right side of the machine.

Foundation Base

1 )The foundation of the concrete base, according to the operation weight of the machines, will put on steel bars, diameter above 9.5 mm, and are clustered together on the upper and lower layer of the base, interspaced about 100mm.

5)           When making concrete floor to be foundation. it is necessary to rough the surface. Clean the floor before the installation.

6)           The    concrete base has to be rigid; the mixing proportion of concrete is

1:2:4.Put required anchor bolts into base, according to the request. Polishing and flat the surface of the base when finished.

7)           Put      the machine on the base when it is fully dried out and rigid.
It    has to be a well drainage works around the base to prevent water remaining.
  
  
 

Machine color--- blue or gray white and black, or others;

Machine brand--- factory brand, OEM brand or no brand;

We do OEM!

We do B2B, B2C!

 
 
E-mail: 15113320579@vip.126.com
 
 
Home Page