Industrial Scrap Shear 630 Ton For Steel Mill Furnace Feeding PLC Automatic Remote Control

1. Product Description

The Q43W-6300A 630 ton industrial scrap shear is designed for steel mills, heavy scrap processing centers, and ferrous recycling operations that need to prepare oversized scrap for furnace charging. This machine is especially suitable for cutting long structural steel, heavy steel plate offcuts, angle steel, channel steel, round steel, and other mixed heavy ferrous scrap into more manageable sizes for downstream handling and melting.

For steel plants, furnace feeding efficiency depends heavily on whether incoming scrap can be sized consistently and loaded smoothly. Oversized scrap often creates handling difficulties, irregular furnace charging, and unnecessary manual intervention. The Q43W-6300A is built to solve this problem by combining strong shearing force, a large feeding opening, PLC automatic control, and remote operation. It helps transform bulky scrap into more uniform pieces that are easier to load, transfer, store, and feed into steelmaking processes.

This model uses a 3700 × 2500 mm feeding mouth, a 1500 mm blade length, and a PLC automatic remote control system to support stable daily operation in demanding industrial environments. With a cutting speed of 3–4 cuts per minute and a processing capacity of 8–10 tons per hour, it is a practical choice for medium-to-heavy duty steel scrap preparation lines.

Compared with lighter shearing equipment, the 630 ton configuration offers stronger cutting capability for heavy ferrous scrap while still maintaining efficient operation and controlled output sizing. For buyers who need a machine focused on steel mill furnace feeding preparation, this industrial scrap shear provides a balance of cutting force, automation, and practical plant-side performance.

2. Recommended Application Scenarios

2.1 Steel Mill Furnace Feeding Preparation

This machine is suitable for steel mills that need to reduce oversized ferrous scrap before furnace charging. It helps standardize scrap dimensions and improve feeding efficiency.

2.2 Heavy Ferrous Scrap Processing

It is well suited for processing heavy structural steel, steel plate offcuts, angle steel, channel steel, round steel, and other bulky ferrous materials that require size reduction before loading or melting.

2.3 Scrap Preparation Centers Supplying Steel Plants

Independent scrap processors supplying furnace-ready material to steel mills can use this model to produce more consistent output for downstream transport and charging.

2.4 Industrial Recycling Yards Handling Oversized Steel Scrap

For recycling yards that regularly deal with mixed heavy ferrous scrap, this machine helps reduce handling difficulty and prepares material for more efficient transfer and storage.

3. Suitable Materials

The Q43W-6300A industrial scrap shear is suitable for processing the following materials:

• Square steel
• Round steel
• Angle steel
• Channel steel
• I-beam and structural steel sections
• Steel plate offcuts
• Mixed heavy ferrous scrap
• Bulky scrap for furnace feeding preparation

This model is particularly suitable for operations that need to reduce long or oversized steel scrap into more practical lengths before further processing.

4. Technical Specification Table

5. Why Choose This 630 Ton Industrial Scrap Shear

5.1 Stronger Scrap Preparation for Furnace Charging

The main value of this machine is not only cutting scrap, but preparing it for more efficient furnace feeding. For steel mills, better scrap sizing can improve handling rhythm and reduce preparation bottlenecks.

5.2 Practical Shearing Force for Heavy Ferrous Scrap

The 630 ton class is suitable for buyers who need stronger cutting force than medium-duty scrap shears but do not want to move immediately to a much larger and more expensive heavy-duty system.

5.3 Large Feeding Opening for Bulky Materials

The 3700 × 2500 mm feeding opening makes it easier to load long and oversized scrap sections, reducing repeated repositioning during operation.

5.4 PLC Automatic Remote Control

The PLC automatic remote control system helps simplify operation, improve consistency, and reduce repeated manual control actions during daily cutting work.

5.5 Stable Output for Daily Industrial Use

With a cutting speed of 3–4 cuts per minute and a processing capacity of 8–10 tons per hour, this machine fits the needs of steel plants and heavy scrap processors requiring dependable daily throughput.

6. Core Performance Advantages

6.1 Better Scrap Size Control

More uniform output size helps improve transfer, storage, and downstream furnace charging efficiency.

6.2 Reduced Manual Handling Pressure

Bulky scrap often requires repeated manual adjustment. This machine helps reduce handling complexity by cutting oversized materials into more manageable sections.

6.3 Suitable for Continuous Industrial Operation

The hydraulic system, PLC control, and air cooling arrangement support stable operation in demanding industrial processing environments.

6.4 Good Balance Between Force and Investment

For many buyers, a 630 ton industrial scrap shear offers a practical middle point between lighter shears and much larger heavy-duty lines.

6.5 Adaptable Output Mouth Option

The output mouth can be customized according to practical production needs, helping the machine fit different scrap preparation requirements.

7. Working Process

7.1 Scrap Loading

Oversized ferrous scrap is loaded into the feeding mouth by grab crane or other suitable loading equipment.

7.2 Hold-Down and Positioning

The hydraulic hold-down system helps stabilize the material before cutting to improve cutting consistency.

7.3 Hydraulic Shearing

The cutting system applies strong shearing force to reduce the material into more suitable lengths.

7.4 Output and Transfer

Cut material is discharged for storage, transfer, further sorting, or direct furnace feeding preparation.

8. Optional Considerations for Buyers

When selecting this model, buyers usually evaluate the following points:

1. Main scrap type and section size
2. Expected hourly output
3. Steel mill furnace feeding requirement
4. Site layout and loading method
5. Power supply standard
6. Control preference, such as manual, semi-automatic, or PLC automatic remote control
7. Whether customized output sizing is required

9. RFQ

9.1 What information should buyers provide before quotation?

1. What type of scrap do you process most often?
2. What is the maximum scrap size, section size, or thickness?
3. What hourly output do you expect?
4. Will the machine be used for steel mill furnace feeding or general scrap reduction?
5. What is your local voltage and frequency standard?
6. Do you need PLC automatic control and remote operation?
7. Do you require customized output mouth size or special configuration?

9.2 Why is this information important?

1. It helps confirm whether the 630 ton model is the right choice.
2. It helps determine suitable feeding and output dimensions.
3. It helps match the machine to your scrap yard or steel plant workflow.
4. It allows us to recommend a more accurate configuration and quotation.

10. FAQ

10.1 Is this 630 ton industrial scrap shear suitable for steel mill furnace feeding?

Yes. This model is specifically suitable for preparing oversized ferrous scrap before furnace charging. It helps produce more practical scrap lengths for steel mill feeding operations.

10.2 What materials can this machine process?

It is suitable for square steel, round steel, angle steel, channel steel, I-beam, steel plate offcuts, and mixed heavy ferrous scrap.

10.3 What is the difference between cutting speed and processing capacity?

Cutting speed refers to the number of cuts the machine can complete per minute. Processing capacity refers to the estimated hourly output in tons. For this model, the cutting speed is 3–4 cuts/min and the processing capacity is 8–10 t/h.

10.4 Is PLC automatic remote control included?

Yes. This model is equipped with PLC automatic control and remote operation, which helps improve operating convenience and consistency.

10.5 Is this machine more suitable for steel mills or scrap yards?

It is suitable for both, but its strongest application advantage is in steel mill furnace feeding preparation and heavy ferrous scrap sizing.

10.6 Can the output mouth size be customized?

Yes. The output mouth size can be customized according to practical processing requirements.

11. After-Sales Service

We provide support for equipment selection, technical confirmation, production follow-up, testing before delivery, and installation guidance. For buyers who need a machine for steel mill furnace feeding, we also recommend confirming your main scrap type, target output, and loading method before final configuration, so the machine can better match your production requirement.

12. Call to Action

If you are looking for a 630 ton industrial scrap shear for steel mill furnace feeding, send us your scrap photos, material size, expected hourly output, and working requirement. Our team can recommend a suitable configuration and provide you with a more accurate solution for heavy ferrous scrap preparation.