T 2.0 Mm Stainless Steel 304 Footwear Cleaning Machine / Pass Through Boot Sole Washer
T =2.0 Mm Stainless Steel 304 Footwear Cleaning Machine / Pass Through Boot Sole Washer
Application: for food factory workshop, kitchen, and other industries.
Material:T=2.0mm Stainless steel 304
Functions:
1. For Shoe and Boot sole.
Sole washer, cleaning the shoe/boot sole by rolled brush with water automatically by photoelectric sensor.
Material: SS304 for main body, which is prevent from rust.
Working life: 6-7 years at least.
Specification:
This machine for purpose of food, electronic, pharmacy, chemical industry etc.
This staion is mainly suitable for food, electronic, pharmacy, chemical manufacturing company, The products is made of material of SUS304 which is comply with the standard of food industry. We adopt the one-stop
total solution to clean and disinfect on the product. The design of through start upon sensor induction avoid cross contamination due to touch free operation. The machine comes with a tripod turnstile,user are
coerced into cleaning and disinfecting hand before entrance,one-stop solution to clean and disinfect hand and sole.
Function & features:
One-stop solution to clean and disinfect hand and sole.
Through start upon sensor induction avoid cross contamination
Sole Cleaning function:inspective start upon cleaning sole.built-in liquid tank can hold all kinds of detergent or disinfector
Working principle:
Motor drive the 2 brushes on the clean stage to clean sole.
User stand on the clean stage, the brushes rotate to clean the shoe soles.
Start upon sensor induction, stop upon time out
Installation:
Need a flat and smooth floor indoor, to put the machine.
Need water supply and drainage pipe or hose to connect.
Need power supply 220VAC.
Technical parameter:
| Model | ZS-9110 |
| Original | Made in China |
| Electric control | Integration: OMRON/Weidmuller/CHINT |
| Cleaning model/water temperature |
circulate-line/cleaning with water/10-30
|
| Cleaning type/Clean length | Roller brush 2 set/Length 1000mm |
| Brush material/Spec. | Nylon/150x1000mm |
| Water volume(KGS) | 32 |
| Inlet part/pressure | SS304 Solenoid valve/6bar |
| Inlet connector | DN25/ 3/4" internal threaded |
| Soap volume | 20L |
| Proportion of soap | Mix soap and water automatically, then spray them to the brush |
| Water level control | Ball float valve (DC24V) |
| Water out way | Floor drain |
| Drainage connector | 50mm |
| Start type | Start upon sensor induction, stop upon time out (30-60s) |
| Voltage | AC220 50Hz,single phase |
| Motor power | 120W |
| Total power | 360W |
| Sate guard | Leakage/overload/short circuit |
| Main material | SUS304 |
| Size( LxWxH)mm | 2105x850x1280 |
| Weight (KGS) | 190KG |
| Packing | Plywood case |
Packing: Plywood case
Contact person: Rita Guo
Whatsapp: 86-13712072567
Email: sales@cleanroom-airshower.com; ritagly@dgzsjh.com.cn
Websits: www.cleanroom-airshower.com
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.