103C series horizontal lathe

This series horizontal lathe is a new-designed product, which are based on 63C series lathe according to the market’s demand. The lathe is especially suitable for machining light-duty big disc work pieces and big diameter shaft work pieces.It including: CW61/2103C, CW61/2123C,CW61/2143C,CW61/2163C,CW61/2183C.The distance between centers are 1500mm, 2000mm, 3000mm, 4500mm, 6000mm.

Item	Unit	Spec./Model
		CW61/2103C	CW61/2123C	CW6 1/2 143C	CW6 1/2 163C	CW61/2183C
Swing in bed	mm	1030	1230	1430	1630	1830
Swing in gap	mm	1200	1400	1600	1800	2000
Swing over cross slide	mm	700	900	1100	1240	1440
Distance between centers	mm	1500,2000,3000,4500,6000
Length in gap from face plate	mm	380
Spindle nose		C11 or D11
Spindle bore	mm	105,130
Spindle speed	rpm/steps	10-800/18 7-576/18 6-480/18
Cross slide travel	mm	615 715 815 915
Top rest travel	mm	225 300
Rapid traverse	mm/min	longitudinal Axe Z:3200, cross A xe X:1400
Quill diameter	mm	120
Quill travel	mm	270
Quill taper		MT6
Bed width	mm	610
Metric threads	mm/kinds	1-240/53
Inch threads	tpi/kinds	30-2/31
Module threads	mm/kinds	0.25-60/42
Diametral pitch threads	tpi/kinds	60-0.5/47
longitudinal feeds	mm/r	0.07-16.72
ain motor power	kw	0.04-9.6
Main motor power	kw	11

· Precision ground and supersonic frequency hardened bedway is designed in double wall structure,giving super rigidity
· The spindle system is high in rigidity and accuracy
· The design of the main drive is optimized and the gears in the headstock are precision ground.The noise of the machine is low
· The machine can turn about 200 kinds of metric,whitworth,module and D.P.Threads
· An automatic stop device is used to realize automatic stop for the machine of a certain length workpiece,which is safe and eliable
· A pedal braking device provide quick and effective stop while operating