CD125 vertical CNC lathe，CK51125A vertical CNC lathe，CK51125A vertical CNC lathe
Introduction
(1)This efficient vertical lathe is designed for rough/finish machining of motor casings.
(2)The base and column are made up of high grade cast iron with good vibration damping and stability.
(3)Vertical structure, easy for workpiece to be set, small floor area.
(4)Medium frequency hardened and precision ground, the sliding ways of X-axis crossbeam offer good dynamic response and lasting accuracy. The ways are coated with substance especially for guide ways, low friction, wearing resistance and quick response.
(5)Square slide sleeper structure is used in Z-axis with high rigidity. It has the advantage of machining large and deep hole.
(6) Centralized operation panel makes it an ease to operate the lathe.
(7) All measuring units accord with international measuring system.
(8) High accuracy ball screws and bearings are used in X/Z axes, with lasting accuracy.
Specifications
| Description | Unit | Specification | |
| Capacity | Dia. of table | mm | 1000 |
| Max. swing dia. | mm | Φ1250 | |
| Max. turning dia. | mm | Φ1100 | |
| Max. work length | mm | 900 | |
| Max. work weight | kg | 4000 | |
| Table | Rotation speed of table | r/min | 15~150 |
| Max. torque of table | Nm | 1500 | |
| Power of main motor | kW | 15 (general motor) | |
| Feed | Travel X | mm | 650 |
| Travel of slide sleeper Z | mm | 900 | |
| Rapid traverse X/Z | mm/min | 10/10 | |
| Servo motor torque X/Z | Nm | 23/23 | |
| Servo motor power X/Z | kW | 4.0/4.0 | |
| Ball screw diameter X/Z | mm | Φ50 /Φ50 | |
| Turret | Number of tools | 2 | |
| Tool section | mm | 32×32 | |
| Others | Power | kVA | 25 |
| Dimensions(L×W×H) | mm | 2420×2081×3535 | |
| Gross weight | kg | 10000 | |
Introduction
1.High efficiency vertical CNC lathe for machining large and mediate workpieces
2.High grade cast iron machine base and column with good stibility and excellent shockproof performance.
3.Vertical structure with convenient workpiece setting-up and small floor area.
4.Oil and water separating structure makes coolant clear, environment-friendly and permanent.
5.The coolant tank is a separate one which is easy to clean.
6.High precision and high rigidity cartridge type spindle is convenient to maintain.
7.the spindle sleeve is complete symmetrical and designed suspending, thus the spindle structure can eliminate thermal deformation influence to machining accuracy.
8. Powerful AC spindle motor enhances the stability of machine.
9. Spindle lubrication adopts imported high class lubrication grease, full-enclosed, free of maintenance.
10.Super-heavy loading linear rolling guideways are used on carriage and column, with good dynamic responsibility and fine accuracy maintaining.
11.Equipped with high quality 6-station vertical electrical turret, rigid, rapid and reliable tool-changing.
12.Centralized machine operation panel makes the operation more convenient and prompt.
13.X/Z-axis lead screw uses high precision ball screws and special purpose bearings for lead screw with good accuracy maintaining.
14.Integrated full-enclosed guard is environment-protection and clear.
Specifications
| Item | Unit | CK516 | CK516A(FANUC 0i-mate) | ||
| Capacity | Max swing | mm | Φ850 | Φ850 | |
| Max turning dia. | mm | Φ750 | Φ750 | ||
| Max turning dia. over slide | mm | Φ630 | Φ630 | ||
| Max turning height | mm | 600 | 600 | ||
| Spindle | Hydraulic chuck dia. | mm | Solid 450(18″) | 18″ | |
| Spindle nose | A2-11 | A2-11 | |||
| Spindle bearing dia. | mm | 180/160( front/rear) | 180/160( front/rear ) | ||
| Spindle speed | rpm | 10-1600 | 30-150 | 50-1200 | |
| Spindle motor | α22/7000i | Motor(standard equipment) |
MK Motor (Optional) |
||
| Spindle power | Kw | 22/26 | 15 | 30/37 | |
| Max spindle torque | Nm | 1192 | 950 | 1062 | |
| Carriage | X/Z-axis travel | mm | 640/650 | 640/650 | |
| X/Z-axis rapid traverse | m/min | 14/14 | 14/14 | ||
| X/Z-axis servo motor | α22i/α22i | α22i/α22i | |||
| X/Z-axis servo motor movement | Nm | 22/22 | 22/22 | ||
| X/Z-axis motor power | Kw | 4.0/4.0 | 4.0/4.0 | ||
| X/Z-axis ball screw dia./lead | mm | Φ50X10/Φ50X10 | Φ50X10/Φ50X10 | ||
| X/Z-axis linear way width | mm | 45/55 | 45/55 | ||
| Turret | Number of station | Vertical 6-station | Vertical 6-station | ||
| Tool section (turning/boring) | mm | 32X32/Φ12～Φ50 | 32X32/Φ12～Φ50 | ||
| Others | Power source | kVA | 45 | 45 | |
| Dimension (L×W×H) | mm | 2500X2600X3400 | 2500X2600X3400 | ||
| Weight | Kg | 10000 | 10000 | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.