High-quality Graphite Mold For Aluminum Smelting​

Graphite Mould Series can be divided into level continuous casting graphite mould or vertical (up-drawing) continuous casting mould by the casting mode. By the cast materials it is divided into:
1. Brass continuous casting graphite mould
2. Red copper continuous casting graphite mould
3. Continuous casting graphite mould for jewelry of gold, silver, platinum, etc.
4. Steel and stainless steel continuous casting graphite mould.
By the shape of the cast product, it is divided into round bar mould, hollow tube mould, and shaped graphite mould.
 
Specifications:

 
NOTE: We can make it as your requirements or drawing.
 
Advantages:
1).Good current loading ability:The welding point current loading ability is same to that of conductor;
2). Good mechanical performance: The connection is a molecular connection. It is a permanent connection ,no loss or corrosion result to high resistance;
3). Stable dash current resistance: The test shows that in the surge of big current in short time, and the conductor melts earlier than the connection point, no damaged by surge current.
4). Good resistance to corrosion: The welding joint is covered by copper and more strong than copper, it provides good resistance to corrosion.
5). Simple and safe connection: Neither outside power nor facility is required. It take very little time to finish one welding both indoor and outdoor.
6). Free control the reaction temperature: Different welding powder is provided according to the metal features, so the welding powder can be very solid.
 
Using instruction:
1.Avoid contacting of hot molten metals with water, oil, grease, etc. It may cause excessive
spatter and burns.
2. Do not uses in flammable vapors or dust, a fire or explosion may happen.
3. void fire, mould must be stored in dry, well-ventilated area, away from open flame and excessive heat.
4. Avoid looking directly at the light of the reaction. It may irritate your eyes.
5. Wear safety glasses and leather gloves to use the mould.