Custom made Pin type load cell 30t 20t 10t pin type force sensor
Pin type load cell 30t 20t 10t pin type force sensor
Pin load cells are widely used for overload protection in hoisting equipment,mooring devices, winches, coupling devices, construction machinery and so on.Load pins can replace the shaft pins in exsiting system without changing the current structure thanks to its fully customized dimensions.Bonded wheatstone full bridge delivers unamplified mV/V signal output,built-in amplifier for 0-5V/0-10V/4-20mA output is also avaialble depending on the dimensions of the pin force sensor.Forsentek is capable of customizing load pins ranging up to 50 tons upon client's specific requirements.
Specifications
| Rated capacity |
4t 10t 20t 30t (Customizable) |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.5% F.S. |
| Hysteresis | ±0.5% F.S. |
| Non-repeatability | ±0.2% F.S. |
| Creep(5min) | ±0.1% F.S. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift zero | ±0.03% F.S./oC |
| Temp. shift span | ±0.03% F.S./oC |
| Input resistance | 790±100 ohms |
| Output resistance | 705±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded cable |
| Wiring code |
Red--Exc+ Black--Exc- Green--Sig+ White--Sig- |
Pin type load cell customizable
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.