F-400-5 Air Bellow Cross Yokohama S-400-5R Pneumatic Suspension Rubber Air Spring

Features of the S-400-5R Air Spring
Type : Pneumatic suspension rubber air spring
Model: F-400-5
Convolutions: 5
Manufacturer: GUOMAT
Brand: GUOMAT
Suitable for press machines and concrete block machinery

GUOMAT F-400-5 Air Spring Technical Data
Design High(mm): 276mm
Maximum High(mm): 435mm
Minimum Height(mm): 156mm
Commonly Maximum Stroke(mm): ±113mm
The Largest Diameter When Compressed(mm): 460mm
Using Maximum Internal Pressure (Mpa): 0.69Mpa

How to Correctly Install a Punch Press Air Spring?
 

Preparation:
Make sure the model and specifications of the punch press air spring match your punch press equipment.
Check that the spring and connecting parts are intact.
 

Installation location:
Determine the installation location of the punch press air spring, usually on the lower pressure plate of the punch press or other appropriate location.
 

Connection:
Connect the punch press air spring to the pneumatic system of the punch press equipment. Make sure the connection is firm and there is no leakage.
 

Adjustment:
According to the punch press operation requirements, adjust the air pressure and the position of the spring to ensure that the force and speed of the downward pressure and rebound meet the requirements.
 

Test:
After the installation is completed, test to ensure the normal operation of the punch press air spring
 

GUOMAT F Type Air Spring