Contitech FS 120-10 Convoluted 1/4NPTF Air Spring For Expansion Chuck
Contitech FS 120-10 Convoluted 1/4NPTF Air Spring For Expansion Chuck
Refer Number
Contitech: FS120-10
Contitech: FS 120-10
Contitech: FS120 10
Contitech: FS 120 10
Contitech: FS12010
Continental FS 120-10 CI 1/4 NPT
Continental FS 120-10 CI 1/4 NPT CA
Goodyear: 1B8-550
Goodyear: 1B8 550
Firestone: W01-358-7564
Firestone: W01 358 7564
Firestone: W013587564
Firestone: WO1-358-7564
Firestone: WO1 358 7564
Firestone: WO13587564
Firestone: w01-358-7564
Firestone: w01 358 7564
Firestone: w013587564
The detailed Specifications and techical data: 1B8×4
| The Max. Diameter | 230mm |
| Air hole/air inlet | 1/4 NPTF |
| Working stroke | maximum 140 mm to minimum 50 mm |
| Top plate screw (nut) teeth | 2×3/8-16UNC |
| Bottom plate screw (nut) teeth | 2×3/8-16UNC |
| Top cover diamete | 135 mm |
| Bottom cover diameter | 135mm |
| Screw center distance | 70mm |
| The air hole distance between the nuts | 35mm |
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 2.0kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 110mm, minimum 90mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 3.9 | 5.3 | 6.8 | 8.3 | 9.6 | 10.9 | 1.8 |
| Spring rate [N/cm] | 1315 | 1620 | 1925 | 2230 | 2535 | 2840 | |
| Natural frequency [Hz] | 2.9 | 2.8 | 2.7 | 2.6 | 2.6 | 2.6 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 120 | 3.1 | 4.3 | 5.6 | 6.9 | 8.0 | 9.2 | 1.9 |
| 110 | 3.9 | 5.3 | 6.8 | 8.3 | 9.6 | 10.9 | 1.8 | |
| 100 | 4.5 | 6.1 | 7.9 | 9.7 | 11.0 | 12.4 | 1.7 | |
| 90 | 5.0 | 6.8 | 8.9 | 10.8 | 12.2 | 13.8 | 1.5 | |
| 80 | 5.5 | 7.4 | 9.7 | 11.6 | 13.3 | 15.0 | 1.3 | |
| 70 | 5.9 | 7.9 | 10.3 | 12.3 | 14.2 | 16.0 | 1.1 | |
| 60 | 6.3 | 8.2 | 10.7 | 13.0 | 15.0 | 17.0 | 0.9 | |
Guomat 1B8×4 air spring applied to expansion chuck
The air spring is filled with compressed air in a sealed container, and uses the compressibility of the gas to achieve its elastic effect. Air springs have ideal nonlinear elastic characteristics.
The height of the annular air spring is limited from the inside, then its rubber walls will expand outwards when inflated. In this way, the air spring can be used as an expansion chuck. Note that the air must be drawn from the same mechanism that limits the height of the air spring.
The reated picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.