Firestone W01-M58-8721 Contitech 836m2K1/60210 Granning 15996 Truck Air Suspension Bag

Firestone W01-M58-8721 Contitech 836M2K1/60210 Granning 15996 Truck Air Suspension Bag

 
 

Specifications and Detailed Technical Parameters

Truck air spring
Top plate hole: 2pcs x air inlet, 3pcs bolts/studs
Rubber bellow diameter: 305mm
Height: 155-420mm
Piston height: 130mm
Top plate diameter: 272mm
Bottom plate diameter:225mm

GUOMAT NO.1T8721 Spare Parts with Similar Characteristics

Replacing a Semi-Trailer Suspension Air Bag
When replacing a semi-trailer suspension air bag, it is important to follow the correct procedures to ensure safety and functionality. Here is a step-by-step guide on how to replace a semi-trailer suspension air bag:
1. Assess the Condition: Before you begin the replacement process, it is critical to assess the condition of the air bag. Look for signs of wear, such as leaks, cracks, or visible damage. If the air bag is worn or damaged, it will need to be replaced.
2. Gather Necessary Tools: You will need a hydraulic jack or 4x6 wood blocks to support the axle and frame when replacing the air bag. Additionally, a set of wrenches and other basic hand tools are essential for the replacement process.
3. Safety Precautions: Before you begin the replacement, make sure the truck is parked on a level surface and the parking brake is engaged. It is also recommended to wear proper safety gear, such as gloves and safety glasses, to protect yourself during the replacement process.
4. Replacement Process:
Begin by safely raising the truck using a hydraulic jack or wood blocks to provide space for the replacement.
Once the truck is raised, locate the old air bag and carefully remove it from its location.
Install the new airbag in place of the old one, making sure it is properly aligned and secured.
Carefully check all connections and fittings to make sure they are tight and secure.
Lower the truck back to the ground and test the new airbag for proper operation.
5. Test and Inspect: After replacement, it is important to test the new airbag to ensure it is working properly. Check for any signs of leaks or unusual behavior before returning the truck to normal operation.
6. Maintenance Note: Regularly inspect the airbags for signs of wear and replace them as needed to maintain the safety and performance of the truck's suspension system.

Factory workshop