S-500-3R Triple Convoluted Air Spring YOKOHAMA Vibration Isolator With Steel Waist Ring
GUOMAT NO.: F-500-3
Replacement Reference: YOKOHAMA S-500-3R
Type: Triple Convoluted Air Spring
Nominal Diameter: 500 mm
Application: Punch Press & Stamping Equipment
Material: High-quality rubber with reinforced fabric
Structure: Rubber bellows with steel waist ring
Functions: Vibration isolation, shock absorption, lifting and lowering
Suitable for: Industrial machinery and heavy-duty applications
| Parameter | Value |
|---|---|
| Design Height (mm) | 160 |
| Max Height (mm) | 270 |
| Min Height (mm) | 90 |
| Common Maximum Travel (mm) | ±68 |
| Compression Max Outside Diameter (mm) | 560 |
| Effective Area (cm²) | 1965 |
| Volume (L) | 30.3 |
| Load (KN) | 96.3 |
| Dynamic Spring Constant (n/mm) | 1255 |
| Maximum Internal Frequency (Hz) | 1.8 |
| Maximum Internal Pressure (MPa) | 0.69 |
| Internal Pressure Failure (MPa) | 3.9-4.9 |
- Prepare the installation area: Stop the punch press and completely release air pressure from the existing system. Ensure the machine is safely supported before removing the old air spring.
- Remove the old air spring: Disconnect the air supply line and remove mounting bolts or fixing components. Check mounting surfaces for damage, dirt, or deformation.
- Check the new air spring: Confirm that GUOMAT F-500-3 matches required dimensions and mounting configuration. Inspect rubber bellows, steel waist ring, air inlet, and mounting components for visible damage.
- Position the air spring: Place the air spring vertically between designated mounting surfaces. Ensure bellows are centered and steel waist ring is correctly positioned.
- Connect the air supply: Connect the air fitting and air line securely. Use recommended air pressure and ensure there are no leaks.
- Inflate gradually: Supply compressed air slowly and allow the air spring to expand into its working position. Avoid sudden inflation or exceeding manufacturer's recommended pressure.
- Check alignment and clearance: Operate the punch press at low speed through a controlled test cycle. Verify the air spring remains centered and doesn't rub against surrounding components.
- Final inspection: Check air pressure, mounting bolts, air leakage, machine movement, and vibration isolation performance before returning to normal operation.
GUOMAT air springs are manufactured using reinforced rubber materials and metal components to provide reliable performance in industrial applications. The F-500-3 offers a practical replacement solution for YOKOHAMA S-500-3R and can be supplied for standard replacement or customized industrial requirements.
We support OEM, replacement, and custom air spring requirements, including dimensional and connection specifications.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.