W01-M58-6166 Firestone Replaces By Goodyear Air Spring 1B8-850 Bellows 579-91-3-530
W01-M58-6166 Firestone Replaces by Goodyear Air Spring 1B8-850 Bellows 579-91-3-530
Technical Parameters of Goodyear Air Spring 1B8-850
❶Nut / Blind Nut
Top Cover Plate Screw (Nut) Tooth : 2 PiecesXM8x1.25
Screw Center Distance of Top Cover Plate :70mm
Bottom Cover Plate Screw (Nut) Tooth : 2 PiecesXM8x1.25
Screw Center Distance of Bottom Cover Plate :70 mm
❷ Gas Hole / Air inlet / Air Fitting
Gas Hole / Air inlet : G1/4
❸ Cover Plate
Top Cover Plate Diameter (Width): 135mm
Bottom Cover Plate Diameter (Width): 135mm
❹Rubber Bellows
Rubber Bellows MAX Diameter : 215 mm
Working Stroke:MIN 50 To MAX 115 MM
❺ Bumper block / Buffer block
Without Bumper Block
❻ Girdle Hoop / Girdle Ring
With Girdle Hoop :NO Piece of Girdle Hoop
- Min. pressure – 0 psi
- Return force to min. height – <45LBF/200N
- Overall Weight – 4.4LB
- Min. Design Height – 1.97inch/50MM
- Inst.Space Required – 9.06inch/230MM
- Max. Stroke – 3.34inch/85MM
Goodyear Air Spring 1B8-850
OEM Original Equipment Manufacturer:Goodyear Air Spring 1B8-850
Firestone W01-M58-6166
Firestone W01 M58 6166
Firestone W01M586166
Contitech FS 120-10 CI G 1/4
Contitech FS120-10 CI G 1/4
Contitech FS12010 CI G 1/4
AIR INLET 1/4 NPT:
Firestone : W01-M58-6166
Contitech : FS 120-9
Dunlop(FR) : 8’’x1 S08100
Bosch : 822419008
Weforma : WBE 300-E2
PNEUMATIC APPLICATION – STATIC CHARACTERISTIC VALUES
| Goodyear Air Spring 1B8-850 Force F [lbf] | |||||
| Pressure p [psi] | 40 | 60 | 80 | 100 | Vol. V [in.³] |
| H 4.50 in./114.3MM | 728 | 1130 | 1570 | 1970 | 110 |
| H 4.00 in./101.6MM | 905 | 1400 | 1940 | 2390 | 100 |
| H 3.50 in./88.9MM | 1050 | 1610 | 2240 | 2740 | 90 |
| H 3.00 in./76.2MM | 1170 | 1770 | 2450 | 3020 | 75 |
| H 2.50 in./63.5MM | 1270 | 1900 | 2630 | 3260 | 57 |
Goodyear Air Spring 1B8-850 VIBRATION ISOLATION – DYNAMIC CHARACTERISTICS
| Pressure p [psi] | 40 | 60 | 80 | 100 | 120 | Vol. V [in.³] | |
| Force (load) F [lbf] | 801 | 1,240 | 1,700 | 2,130 | 2,530 | 110 | |
| Spring rate c [lbf/in] | 709 | 949 | 1,190 | 1,430 | 1,670 | 110 | |
| Natural Frequency f0 [Hz] | 2.9 | 2.8 | 2.7 | 2.6 | 2.6 | 110 | |
| Design height H: recommended 4.33 inch, minimum 3.54 inch | |||||||
PURCHASE ORDER DATA
| Type | Air Inlet | Order No. | |
| with crimped plates |
3/4 NPT 0 in. excentrical |
Goodyear Air Spring 1B8-850 | |
| with crimped plates |
1/4 NPT 0 in. excentrical |
Goodyear Air Spring 1B8-850 | |
SERVICE INSTRUCTIONS
| Thread | max. Torque | |
| 3/8-16 UNC | 20 lbf ft | |
| 1/4 NPT | 20 lbf ft | |
| 3/4 NPT | 40 lbf ft | |
Pay special attention to the fact that rubber is not an "additional rule" for rubber wear. The closer the polarity is, the lower the wear will be than the "addition" and the wear will be highest as the crosslink density increases. Value for money.
- Rubber wear with low glass transition temperature and good molecular chain flexibility is relatively small.
- Add high styrene, short fiber, PVC, PP, polyoxymethylene, PE, nylon and anti-aging agent to the rubber to reduce rubber wear.
- Add high styrene, short fiber, PVC, PP, polyoxymethylene, PE, nylon and anti-aging agent to the rubber to reduce rubber wear.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.