This supplier supports Trade Assurance 

With Trade Assurance, you'll enjoy:

•100% product quality protection

•100% on-time shipment protection

•100% payment protection for your covered amount 

Product Specification

Road Joint Sealing Cracks Resistance Asphalt Pavement Tape is made of asphalt macromolecule polymer, high strength tensile tire base, high temperature resistant and high strength fabric mixed with asphalt. It can be applied to the asphalt concrete surface where cracks or flaking are produced, which can reduce and block the thermal shrinkage stress acting on the pavement, providing an instant seal and preventing further deterioration of the road pavement, applied to the sub-base of the road. It is a new type of highway maintenance material which specially deals with the cracks of asphalt and cement concrete pavement.

Features

1.    Cold applied installation , easy and fast construction

2.  large temperature difference does not crack, effectively prevent water invasion

3.  Prevents cracking in asphalt overlay

4.  Well deal with the cracks of asphalt and cement concrete pavement

5.  Reliable quality, safety and environmental protection

Application

1. Before construction, clean up the surface dust and debris in the cracks,and then paste the tape, after artificial compaction, uncover the separation paper.

2. It can use for sealing of temperature shrinkage cracks and partial structural cracks below 1cm, prior to overlay with new asphalt.

3. The surface temperature of the road must be above 20 degrees during construction. If the temperature is below 20 degrees, it must be ensured that it will be built after half past ten during the clear weather,Or use a blowtorch baked, but time is short.

4. The paving tape can be applied by unskilled labour by application machine, roller or hand resulting in a fast and efficient application.

5. No rain before and after construction (before and after a day) to ensure the absolute drying of the road surface.

Technical Data

Production