carbon fiber tube for Rotor protection sleeve of permanent magnet synchronous & asynchronous motor
carbon fiber tube for Rotor protection sleeve of permanent magnet synchronous & asynchronous motor
This products is suit for rotor protection sleeve of permanent magnet synchronous & asynchronous motor. It size 56.8*55.6*100mm. Bearing temperature 180℃, rotor speed 20,000r/min. When the rotor's speed is lower, For example 2000 r/min, or 3000r/min,8000 r/ min etc, choose stainless steel protection sleeve is good idea. Because it is lower cost. If the rotor's speed is higher, for example 20,000 r/min, 50,000 r/min, Please choose carbon fiber protection sleeve for the rotor. Stainless steel rotor protection sleeve can't match so higher speed.
The max speed for carbon fiber protection sleeve is 100,000 r/min.
| Size | Material | Rotor speed | Working temperature |
| 56.8*55.6*100mm | T700 carbon fiber | 20,000 r/min | 180 degree |
Carbon fiber tube for rotor protction's Advantage:
1. Can bearing high temperature-- 180 degree.
2. Conductive heat quickly
3. Non-Conductive magnet
4. Good dynamic balancing when high-speed
5. permanent magnet synchronous & asynchronous Motor rotor speed 60,000 r/min, The centrifugal deformation 0.2 mm
It suit for the motor speed > 10,000 r/min
There are two way to produce the carbon fiber rotor cover:
1.Produce carbon fiber tube first ;Then Put the present carbon fiber tube cover the outside of rotor
2.Produce the carbon fiber cover directly outside of the rotor
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


