Metallographic Metal

Surface Sample Grinding Polishing Machine with Water Cooling System

Brief Introduction:

iqualitrol GP-2B, MP-2B Grinding and Polishing Machine suitable for metallographic specimen pre-grinding, grinding and polishing operation, is the necessary equppment to make metallographic specimen.

iqualitrol GP-2B, MP-2B equips with cooling device, used to cooling the sample when grinding, to prevent the sample overheating and destroy metallographic organization. 2 people can operate at the same time.

iqualitrol GP-2B, MP-2B is easy to operation, safe and reliable,is the ideal sample preparation equipment for factories, research institutes and universities laboratory.

Technical Specifications:

Application Ranges:

iqualitrol MP-2B Metallographic Sample Grinding Polishing Machine is a single-chip microcomputer control grinding and polishing machine.

With double-disc and double-speed, it is easy to use.

The grinding disc rotates stable with low motor noise.

With washing function at the bottom of the grinding disc, it can prevent the accumulation and precipitation of grinding materials.

Only need to change the abrasive paper and polishing cloth, it can complete various sample grinding, fine grinding and polishing process, which is the ideal sample preparation machine in the laboratory.

After a metallographic sample has been mounted, grinding and polishing creates a flat and even surface. Any potential residue from the mounting process or damage from the sectioning process are ground off to expose the actual microstructure of the sample.

Polishing removes abrasions from the previous steps to provide a smooth surface. iqualitrol grinding and polishing instruments ensure that metallographic instruments provide a reliably clean sample that will be ready for further analysis.

Pre-grinder machine is the result of a large-scale research work and the wisdom of the designers as well as the suggestions of the users. As an excellent piece of specimen pre-grinding, the pre-grinder has a lap with a larger diameter compared with the same kind of machines produced in our country and the rotational speed of its lap is quite different form that of the machines turned out in our country in order to meet the requirements of the pre-grinding of various materials. 　　

The working principle of Pre-grinder machine is as follows: clear water provided by a water tube flows into the rotating lap and the abrasive paper flowing over the water throws the water out of the lap as the result of the excentric force of the rotating lap forming a vacuum space before the atmospheric rescuer presses the abrasive paper on the lap tightly. Now it is time to operate the pre-grinding. When the lap stops rotating, the work is done and abrasive paper can be easily taken off.