Punch Plate Anchors, Stainless Steel 410S, HESLY Brand, China Factory
"U" shaped Refractory Perforated Anchors, Stainless Steel 304, HESLY Brand, China Factory
HESLY's Armour-Anchors can be used in combination with Hexmetal / Flexmetals or as stand alone systems.
HESLY’s Plate Formed Anchors
Plate Formed Anchors are divided into Metallic Anchors and Ceramic Supports. The Metallic Anchors are designed typically for ceramic fiber and for light or medium weight refractories, again configured to provide maximum retention during plant service. The Ceramic Anchor Supports "C" Clips are designed to retain most standard pattern ceramic anchors (Scissor Clip types are available as wire formed) Mainly for light and medium weight duties, their typically small cross section provides low heat transfer with section size providing easy manual or semi-automatic welding. "C" Clips retain ceramic anchors used for anchoring moldable refractories.
HESLY’s Rod Formed Anchors
Rod Formed Anchors / Studs (larger than 3/8" diameter) Heavy weight anchors are used only in the most arduous conditions. They are designed to provide support and attachment of refractory pre-cast sections to plant steelwork, and provide an effective anchoring system in high stress situations. Their design shape minimizes and controls heat transfer and thus provides maximum strength at elevated temperatures. Refractory lining situations that have attendant high live loads occur in plant such as Rotary Kilns, where deep roof and side wall lining of dense refractories require maximum support during operating conditions or heavy weight pre-cast blocks are retained by bolt through, weld on and slip on systems.
HESLY refractory anchoring systems are produced in SS 304, SS 310, Alloy 601 and other heat resistant alloys.
Our refractory anchor products list as follow:
|
Shape |
Material |
Refractory Material |
Temperature Range |
Prime Use |
Weld Type |
|
|
304 Stainless Steel |
Lightweight Castable |
Below 1500°F |
Stacks, Ducts, Process Heaters |
Hand Weld |
|
|
304 Stainless Steel |
Lightweight Castable |
Below 1500°F |
Stacks, Ducts, Process Heaters |
Hand Weld |
|
|
304 Stainless Steel |
Lightweight Castable |
Below 1500°F |
Stacks, Ducts, Process Heaters |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Low to Medium Density Castable |
Below 1800°F |
Stacks, Incinerators, Reformers, Palletizing Furnaces |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Hand Weld |
|
|
304 Stainless Steel |
Medium to High Density Castable |
Over 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Transfer Lines |
Stud Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
Over 2000°F |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
High Density Castable (Dual Component Linings) |
High Density Castable (Dual Component Linings) |
Rotary Kilns, Furnace Arches, Furnace Roofs, Reactor Bottoms |
Hand Weld |
|
|
304 Stainless Steel |
Fibre Blanket, Fibre Modules |
900° to 2250°F |
Heat Treat Furnaces, Car Bottom Furnaces, Rotary Hearth |
Stud Weld |
|
|
304 Stainless Steel |
Fibre Blanket, Fibre Modules |
900° to 2250°F |
Heat Treat Furnaces, Car Bottom Furnaces, Rotary Hearth |
Stud Weld |
|
|
Ceramic |
Fibre Blanket, Fibre Modules |
900° to 2250°F |
Heat Treat Furnaces, Car Bottom Furnaces, Rotary Hearth |
N/A |
|
|
304 Stainless Steel |
Low to High Density Castable |
1200° to 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Stacks, Incinerators |
Stud Weld |
|
|
304 Stainless Steel |
Low to High Density Castable |
1200° to 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Stacks, Incinerators |
Stud Weld |
|
|
304 Stainless Steel |
Low to High Density Castable |
1200° to 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Stacks, Incinerators |
Stud Weld |
|
|
304 Stainless Steel |
Low to High Density Castable |
1200° to 2000°F |
1200° to 2000°F |
Stud Weld |
|
|
304 Stainless Steel |
Low to High Density Castable |
1200° to 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Stacks, Incinerators |
Stud Weld |
|
|
304 Stainless Steel |
Low to High Density Castable |
1200° to 2000°F |
Open Hearth Furnaces, Catalytic Crackers, Rotary Kilns, Stacks, Incinerators |
Stud Weld |
|
|
304 Stainless Steel |
Low Temperature Ceramic Fibre |
600° to 1200°F |
Stacks Heat Treating |
Stud Weld |
|
|
304 Stainless Steel |
Low Temperature Ceramic Fibre |
600° to 1200°F |
Stacks Heat Treating |
Stud Weld |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.