$China 410S Hexagonal Mesh for Refractory Dryers Lining | 3/4$

410S Hexagonal Mesh for Refractory Dryers Lining | 3/4" X 14ga strips | 2" hexagonal hole | 1X2m sheet - HESLY China

Price Negotiable

Price: Negotiated according to the order

MOQ: 1㎡

Delivery Time: according to the order (hexmetal in stock)

Brand: HESLY

Product Description

410S Hexagonal Mesh for Refractory Dryers Lining | 3/4" X 14ga strips | 2" hexagonal hole | 1X2m sheet - HESLY China

HESLY's 410S Hex steel (Hex mesh, Hex metal) is a hexagonal cellular mesh grating specifically designed for reinforcing both linings and flooring. It acts as a surface framework to hold cement or refractory in position, and relieves stress in the lining's upper crust, which prevents spalling and cracking. As a result of Hexsteel's strength and unique design, abrasion and corrosion are retarded and refractory life is significantly extended. Even hot gaseous substances cannot erode the surface material because they are reflected away from the surface by the metal cellular grid.

Since Hex Metal's flexibility allows it to be rolled, it easily conforms to circular shapes. It is ideal for lining Ducts, Furnaces, Reactor Vessels, Cyclones, Flue Gas Lines and other high temperature equipment of virtually any shape or configuration.

Flex Hexsteel

Flex Hexmetal is the direct counterpart of Hex metal. It performs all the same functions in reinforcement of thin wall refractory linings, while its' design allows free form rolling to very small diameters. Hex metal becomes impractical when the section of plant being protected is of small diameter. The free rolling capabilities of Flex metal allows plant as small as 150 mm to be lined. Typical applications include Air Distributors, Cyclone Dip legs, Fan Cases, or any other plants where the practicality of free rolling material is beneficial to maintenance activities

Refractory Anchors

HESLY's Armour-Anchors can be used in combination with Hexmetals / Flexmetals or as stand alone systems.

HESLY’s Wire Formed Anchors

Wire Formed Anchors are configured to suit all light, medium and dense refractories in providing maximum support during refractory application and maximum retention of refractories during plant service. Consideration is given to expansion, heat transfer, method of application, environmental conditions and design of host unit for individual applications. Anchors are designed for Manual and Semi-Automatic Welding.

The range of applications is limited only by the structural strength of the anchor section. The maximum section size of wire formed anchors is 3/8" (9.5mm). Typical applications include most process plant including furnaces, ductwork, heaters or reactors.

HESLY’s Plate Formed Anchors

Plate Formed Anchors are divided into Metallic Anchors and Ceramic Supports. The Metallic Anchors are designed typically for ceramic fiber and for light or medium weight refractories, again configured to provide maximum retention during plant service. The Ceramic Anchor Supports "C" Clips are designed to retain most standard pattern ceramic anchors (Scissor Clip types are available as wire formed) Mainly for light and medium weight duties, their typically small cross section provides low heat transfer with section size providing easy manual or semi-automatic welding. "C" Clips retain ceramic anchors used for anchoring moldable refractories.

HESLY’s Rod Formed Anchors

Rod Formed Anchors / Studs (larger than 3/8" diameter) Heavy weight anchors are used only in the most arduous conditions. They are designed to provide support and attachment of refractory pre-cast sections to plant steelwork, and provide an effective anchoring system in high stress situations. Their design shape minimizes and controls heat transfer and thus provides maximum strength at elevated temperatures. Refractory lining situations that have attendant high live loads occur in plant such as Rotary Kilns, where deep roof and side wall lining of dense refractories require maximum support during operating conditions or heavy weight pre-cast blocks are retained by bolt through, weld on and slip on systems.

USES FOR HESLY HEX METAL

HESLY hexmesh Typical Service Temperature:

Anchorage Material		Chemical Composition								Typical Service Temperature
AISI	DIN	C%	Si%	Mn%	P%	S%	Cr%	Ni%	others	Typical Service Temperature
304	1.4301	≤0.08	≤1.00	≤2.00	≤0.45	≤0.30	18.0—20.0	8.0—10.0	N	800℃
316	1.4401/1.4436	≤0.08	≤0.75	≤2.00	≤0.45	≤0.30	16.0—18.0	10.0—14.0	N:Mo	800℃
321	1.4541	≤0.08	≤0.75	≤2.00	≤0.45	≤0.30	17.0—19.0	9.0—12.0	Ti	800℃
310S	1.4845	≤0.08	≤1.50	≤2.00	≤0.45	≤0.30	24.0—26.0	19.0—22.0	—	1150℃
Inconel 601	2.4851	≤0.10	≤0.50	≤1.00	—	≤0.15	21.0—25.0	58.0—63.0	Al:Cu	1200℃
Inconel 800	1.4876	≤0.10	≤1.00	≤1.50	≤0.45	≤0.15	19.0—23.0	30.0—35.0	Al:Ti	1200℃
410S	1.4001	≤0.08	≤1.00	≤1.00	≤0.40	≤0.30	11.5—13.5	≤0.60	—	750℃
CARBON STEEL		VARIOUS								550℃

Features of Stainless Steel which used for Hex Mesh:

SS	Features
304	Good heat resistance ,corrosion resistance ,strength at low temperature and mechanical properties, good hot working performance for example punching,bending,etc , no heat treatment influence phenomenon(nonmagnetic,U-96°C-800°C).
304L	As one kind of low carbon SS304,In the general, the similar corrosion resistance with SS 304 .But after welding or in eliminating stress, the outstanding ability of the resistance to corrosion of grain boundaries In under the condition of no-heat treatment, maintain good corrosion resistance,Used in -196°C~800°C.
316	Owing to add to Mo,So the corrosion resistance of atmospheric and high temperature strength are very good,Can be used in harsh conditions ,Processing sclerosing optimal (nonmagnetic).
316L	As one kind of low carbon series SSS316, in addition to the same feature of SS316, Optimal resistance to corrosion of grain boundaries
310S	As heat-resistant part in the under the temperature 1100°C,Oxidation stability steel ,etc

HESLY hex metal ordinary specs:

HESLY-hex Metal ordinary specifications
ITEM	SPECS		B	A	AF
1	1.2 X 10 X 50mm		1.2mm	10mm	40mm
2	1.2 X 15 X 50mm		1.2mm	15mm	50mm
3	1.2 X 20 X 50mm		1.2mm	20mm	50mm
4	1.5 X 10 X 50mm		1.5mm	10mm	50mm
5	1.5 X 15 X 50mm		1.5mm	15mm	50mm
6	1.5 X 20 X 50mm		1.5mm	20mm	50mm
7	1.8 X 15 X 50mm		1.8mm	15mm	50mm
8	1.8 X 20 X 50mm		1.8mm	20mm	50mm
9	1.8 X 25 X 50mm		1.8mm	25mm	50mm
10	2.0 X 15 X 50mm		2.0mm	15mm	50mm
11	2.0 X 20 X 50mm		2.0mm	20mm	50mm
12	2.0 X 25 X 50mm		2.0mm	25mm	50mm
13	2.0 X 30 X 50mm		2.0mm	30mm	50mm
14	2.0 X 30 X 80mm		2.0mm	30mm	80mm
Remark	A/F	Min: 40mm Max: 100mm
	MATERIAL	A3 ,0Cr13,1Cr13,SS304,SS316,1Cr18Ni9Ti,SS310S

HESLY Flex metal:

Hexsteel for refractory lining

410S Hexmesh Strips	410S Hexmesh Curragted Strips

HESLY Hexsteel Metal	HESLY Hexmetal China

Hex Mesh for cyclone	Hex Mesh for cyclone

Welded Hexmesh	Welded Hexmesh

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company HESLY HexMesh & Anchor Factory - a brand of Hesly Metal Mesh Group Limited

Location 22#, Zhangshe Wire Mesh Industrial Park, Anping County, Hebei, China

Contact Person Bai

Request A Quote

Email Address *

Please check your email address.

Phone / WhatsApp

Your Message *

Your message must be at least 20 characters.

410S Hexagonal Mesh for Refractory Dryers Lining | 3/4" X 14ga strips | 2" hexagonal hole | 1X2m sheet - HESLY China

410S Hexagonal Mesh for Refractory Dryers Lining | 3/4" X 14ga strips | 2" hexagonal hole | 1X2m sheet - HESLY China

Flex Hexsteel

Refractory Anchors

USES FOR HESLY HEX METAL

HESLY hexmesh Typical Service Temperature:

Features of Stainless Steel which used for Hex Mesh:

HESLY hex metal ordinary specs:

HESLY Flex metal:

ASTM 304s | Hexsteel Mesh for metallurgival industry | Strip thickness 2.0mm| 19mm strip height | 46mm hole -HESLY group

L type Hesly Hexmesh for Refractory Lining | Low carbon Steel | 2.5X25mm strip | 46mm hexagonal hole -HESLY group

H type Hesly Hexmesh for Refractory Lining | Low carbon Steel | 2.5X25mm strip | 46mm hexagonal hole -HESLY group

2"x12ga Hexsteel Mesh Refractory Linings | Low Carbon Steel | Lance Anchor | China Hexmesh Steel Factory

2"x11ga Hexsteel Mesh Refractory Linings | China Hexmesh Steel Factory

1"x12ga Hexsteel Mesh Refractory Linings | China Hexmesh Steel Factory

Din 1.4301 alloy hexogal mesh | China hexsteel supplier | 14G thk, depth 3/4” (19mm), 48mm opening

Inconel 601 tortoise shell mesh, 1200 high temp resistence hexsteel | thickness 2.0mm, height 19mm, opening 48mm

25mm height Din1.4541 Hexmesh for Refractory Linings in cyclones | China Hex-Mesh Supplier | 1mx2m, 40pcs/pallet

19mm height 1Cr18Ni9Ti Hexmesh for Refractory Linings in catcher pipe | China Hex-Mesh Supplier | 1mx2m, 50pcs/pallet

19mm height Din 1.4001 Hexmesh for Refractory Linings in boiler flue | China Hex-Mesh Supplier | 1mx1m, 50pcs/pallet

15mm height 410s Hexmesh for Refractory Linings in furnaces | China Hex-Mesh Supplier | 1mx1m, 50pcs/pallet

Get in Touch

Request A Quote