1' height Hexmesh for Refractory Linings in cyclones | China Hex-Mesh Supplier | 1mx2m, 30pcs/pallet
1m wide, 2m long standard Hexmesh For Refractory Lining in cyclones, China Hex-Mesh Supplier
![HESLY Hexmesh China Factory sales]()
China HESLY Hex Mesh - Refractory Lining
China HESLY Hex Mesh - Refractory LiningAs refractories, hex steel mesh’s characteristics are flexibility, high strength, and erosion resistance. Hex mesh is excellent for refractory linings in furnaces, reactors, cyclones, ducts, and flues.
Hex steel is put to use in many industries including power plants, chemical industry, cement plants, steel, petroleum, power generation, and other large devices. Hex material can largely improve the heat erosion and abrasion resistance.
Typical Service Temperature For Different Material - Hesly Hexmesh
|
Anchorage Material |
Chemical Composition |
Typical Service Temperature |
||||||||
|
AISI |
DIN |
C% |
Si% |
Mn% |
P% |
S% |
Cr% |
Ni% |
others |
|
|
304 |
1.4301 |
≤0.08 |
≤1.00 |
≤2.00 |
≤0.45 |
≤0.30 |
18.0—20.0 |
8.0—10.0 |
N |
800℃ |
|
316 |
1.4401/1.4436 |
≤0.08 |
≤0.75 |
≤2.00 |
≤0.45 |
≤0.30 |
16.0—18.0 |
10.0—14.0 |
N:Mo |
800℃ |
|
321 |
1.4541 |
≤0.08 |
≤0.75 |
≤2.00 |
≤0.45 |
≤0.30 |
17.0—19.0 |
9.0—12.0 |
Ti |
800℃ |
|
310S |
1.4845 |
≤0.08 |
≤1.50 |
≤2.00 |
≤0.45 |
≤0.30 |
24.0—26.0 |
19.0—22.0 |
— |
1150℃ |
|
Inconel 601 |
2.4851 |
≤0.10 |
≤0.50 |
≤1.00 |
— |
≤0.15 |
21.0—25.0 |
58.0—63.0 |
Al:Cu |
1200℃ |
|
Inconel 800 |
1.4876 |
≤0.10 |
≤1.00 |
≤1.50 |
≤0.45 |
≤0.15 |
19.0—23.0 |
30.0—35.0 |
Al:Ti |
1200℃ |
|
410S |
1.4001 |
≤0.08 |
≤1.00 |
≤1.00 |
≤0.40 |
≤0.30 |
11.5—13.5 |
≤0.60 |
— |
750℃ |
|
CARBON STEEL |
VARIOUS |
550℃ |
||||||||
Features of Stainless Steel which used for Hex Mesh
|
SS |
Features |
|
304 |
Good heat resistance ,corrosion resistance ,strength at low temperature and mechanical properties, good hot working performance for example punching,bending,etc , no heat treatment influence phenomenon(nonmagnetic,U-96°C-800°C). |
|
304L |
As one kind of low carbon SS304,In the general, the similar corrosion resistance with SS 304 .But after welding or in eliminating stress, the outstanding ability of the resistance to corrosion of grain boundaries In under the condition of no-heat treatment, maintain good corrosion resistance,Used in -196°C~800°C. |
|
316 |
Owing to add to Mo,So the corrosion resistance of atmospheric and high temperature strength are very good,Can be used in harsh conditions ,Processing sclerosing optimal (nonmagnetic). |
|
316L |
As one kind of low carbon series SSS316, in addition to the same feature of SS316, Optimal resistance to corrosion of grain boundaries |
|
310S |
As heat-resistant part in the under the temperature 1100°C,Oxidation stability steel ,etc |
General Specification Sheet
|
HESLY-hex Metal ordinary specifications |
|||||
|
ITEM |
SPECS |
B |
A |
AF |
|
|
1 |
1.2 X 10 X 50mm |
1.2mm |
10mm |
40mm |
|
|
2 |
1.2 X 15 X 50mm |
1.2mm |
15mm |
50mm |
|
|
3 |
1.2 X 20 X 50mm |
1.2mm |
20mm |
50mm |
|
|
4 |
1.5 X 10 X 50mm |
1.5mm |
10mm |
50mm |
|
|
5 |
1.5 X 15 X 50mm |
1.5mm |
15mm |
50mm |
|
|
6 |
1.5 X 20 X 50mm |
1.5mm |
20mm |
50mm |
|
|
7 |
1.8 X 15 X 50mm |
1.8mm |
15mm |
50mm |
|
|
8 |
1.8 X 20 X 50mm |
1.8mm |
20mm |
50mm |
|
|
9 |
1.8 X 25 X 50mm |
1.8mm |
25mm |
50mm |
|
|
10 |
2.0 X 15 X 50mm |
2.0mm |
15mm |
50mm |
|
|
11 |
2.0 X 20 X 50mm |
2.0mm |
20mm |
50mm |
|
|
12 |
2.0 X 25 X 50mm |
2.0mm |
25mm |
50mm |
|
|
13 |
2.0 X 30 X 50mm |
2.0mm |
30mm |
50mm |
|
|
14 |
2.0 X 30 X 80mm |
2.0mm |
30mm |
80mm |
|
|
Remark |
A/F |
Min: 40mm Max: 100mm |
|||
|
MATERIAL |
A3 ,0Cr13,ss304,ss316,ss321,ss310S |
||||
 |
 |
| Offset Lances Curragated Strips for Hexmesh | Curragated Strips for Hexmesh |
 |
 |
| Offset Lanced Hexmesh | Standard Lances Hexmesh |
 |
 |
| Hex Mesh for cyclone | Hex Mesh for cyclone |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.