Low Back Reflection Optical Circulator 3 Ports Fiber Module With LC Connector
Low Back Reflection Optical Circulator 3 Ports Fiber Module With LC Connector
An optical circulator is a special optical passive component apply in optical device
it can be used to separate optical powers that transfer in opposite directions.
by in one single optical fiber, analogous to the operation of an electronic circulator.
An standard optical circulator is a three-port device that allows light to travel in only one direction
Example - from port 1 to port 2, then from port 2 to port 3.
This feature is very important to optical bidirectional transmission and communication.
Usually, it is used for optical transceiver, FBG( fiber Bragg grating) filter and optical amplifier.
Features:
- Low Back Reflection
- High Extinction Ratio
- Low Insertion Loss & High Return Loss
Application
- DWDM system
- Add-Drop Multiplexing
- Fiber AmplifierFiber Sensor
- Chromatic Dispersion Compensation Devices
- Fiber Bragg Grating
Specifications
| Parameter | P Grade | |
| Configuration | Port 1 to Port 2 to Port 3 | |
| Operation Wavelength (nm) | 1525 to 1610 | |
| Isolation (dB) | Typical | 0.8 |
| Maximum | 1.0 | |
| Typical Isolation (dB) | 50 | |
| Minimum Isolation (dB) | 35 | |
| Cross Talk (dB) | ≥50 | |
| Polarization Dependent Loss (dB) | <0.2 | |
| Polarization Mode Dispersion | <0.1 | |
| Return Loss(dB) | ≥50 | |
| Power Handling (mW) | 500 | |
| Opterating Temperature (℃) | -5~+75 | |
| Storage Temperature (℃) | -40~+85 | |
| Package dimension (mm) | Φ5.5xL50 orΦ5.5xL63 | |
Specifications may change without notice.
Above specification are for device without connector.
The Tube package
Our factory shows
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.