Fiber PON COUPLER Mechanical Optical Switch With ABS Box Module
fiber optical COUPLER 1X2 Optical switch with ABS Box
General
The 1x2 Micro Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 1 incoming optical signals into 2 output fibers.connected to the 1X2 coupler, splittler 50:50 ratio Electronic positive red and negative black cords for power.
This novel design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost.
1X2 with PON splitter
Features
|
♦ Low Insertion loss ♦ Wide Wavelength Range ♦ Low Crosstalk ♦ High Stability, High Reliability ♦ Epoxy-free on Optical Path ♦ Latching and Non-latching |
♦ Channel Blocking ♦ Configurable Add/Drop ♦ System Monitoring ♦ Single mode or Multimode optional |
Applications
Optical Network PON FTTH
Protection/Restoration
Optical Singnal Routing
Configurable Optical Add/Drop
Transmitter and receiver protection
Instrumentation, testing, and measurement
| Parameters | FSW-1×2-SM-Splitter | ||
| Wavelength Range | nm | 850±40 / 1300±40 | 1260~1650 |
| Operating Wavelength | nm | 850/1300 | 1310/1490/1550/1625/1650 |
| Insertion Loss | dB | Typ:0.8 Max:1.2 | Typ:0.5 Max:1.0 |
| Return Loss | dB | MM≥30 SM≥50 | |
| Crosstalk | dB | MM≥35 SM≥55 | |
| PDL | dB | ≤0.05 | |
| WDL | dB | ≤0.25 | |
| TDL | dB | ≤0.25 | |
| Repeatability | dB | ≤±0.02 | |
| Power Supply | V | 3.0 or 5.0 | |
| Lifetime | Time | ≥107 | |
| Switch Time | ms | ≤8 | |
| Transmission Power | mW | ≤500 | |
| Operating Temperature | ℃ | -20~+80 | |
| Storage Temperature | ℃ | -40~+85 | |
| Weight | g | 16 | |
| Dimension | mm | (L)27×(W)12.0×(H)8.2 | |
Optical Route
PIN Define
| Control Model | Optical Path | Electric Drive | Status Sensor | ||||||
| 1×2 | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 | |
| Latching | P1-P2 | -- | -- | GND | V+ | Close | Open | Open | Close |
| P1-P3 | V+ | GND | -- | -- | Open | Close | Close | Open | |
| Non-latching | P1-P2 | -- | -- | -- | -- | Close | Open | Open | Close |
| P1-P3 | V+ | -- | -- | GND | Open | Close | Close | Open | |
optical swithc Order Information
| Mode | Wavelength | Voltage Type | Control Type | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| S=SM M=MM |
85=850nm 13=1310nm 15=1550nm 13/15=1310/1550nm X=Others |
3=3V 5=5V |
L=Latching N=Non- Latching |
5=50/125 6=62.5/125 9=9/125 X=Others |
25=250um 90=900um 20=2.0mm 30=3.0mm X=Others |
1=1m 2=2m X=Others |
0=None 1=FC/PC 2=FC/APC 3=SC/PC 4=SC/APC 5=ST/PC 6=ST/APC 7=LC/PC 8=LC/APC |
| coupler Parameter | P | A | |
| Operating wavelength (nm) | 980,1310, 1490 ,1550 | ||
| Operating bandwidth (nm) | 980± 10nm,1310 ± 40nm,1490 ± 10nm,1550 ± 40nm | ||
| Fiber Type(dB) |
Corning G652D OR Corning G657 A1 0.15 |
||
| Insertion loss (dB) | 50:/50 | ≤3.3 | ≤3.5 |
| 40/60 | 3.70~4.40≤2.5 | 3.50~4.60/≤2.8 | |
| 30/70 | 5.00~5.60/≤1.8 | 4.90~6.10/≤2.1 | |
| 20/80 | 6.80~7.40/≤1.2 | 6.50~7.70/≤1.2 | |
| 10/90 | 9.60~10.50/≤0.6 | 8.80~11.40/≤0.8 | |
| 5/95 | 12.70~13.50 /≤0.4 | 12.05~14.05/≤0.5 | |
| 3/97 | 14.60~15.50/≤0.3 | 13.60~16.05/≤0.4 | |
| 2/98 | 16.60~17.90/≤0.25 | 15.60~18.20/≤0.3 | |
| 1/99 | 19.20~20.80/≤0.2 | 18.80~21.40/≤0.25 | |
| PDL (dB) | ≤0.1 | ≤0.15 | |
| Return loss(dB) | ≥50 | ≥45 | |
| Directivity (dB) | ≥55 | ||
| Operating temperature (℃) | -40 ~ +85 | ||
The above specification is without connector
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.