1X4 Single Mode 500MW 1650nm Polarization Optic Switch

Price Negotiable

Price: Negotiable

MOQ: 1pcs

Delivery Time: 1~4working days

Brand: HILINK

Product Description

The maintains polarization Optic Switch 1X4 Single Mode Isolation With in both directions supports all wavelength at 1260nm~1650nm or 850nm Multimode wavelength,The Series 1x4 fiber optic switch connects optical channels by redirecting an in- coming optical signal into a selected output fiber. This is achieved by using a patent pending opto-mechanical configuration activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The switch has integrated electrical position sensors, and the new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost. Electronic driver is available for this series of switches.

Features

Unmatched Low Cost

·Low Insertion Loss

·High Channel Isolation

·High Stability, High Reliability ·Epoxy-free on Optical Path ·Latching and Non-latching

Optional for polarization

Applications

Optical Network Protection/Restoration

·Optical Signal Routing

·Configurable Optical Add/Drop ·Transmitter and Receiver Protection ·Network Test Systems ·Instrumentation

Product Feature

Specification Performance

Parameters	Unit				FSW-1×4

Wavelength Range	nm	850±40 /		850±40 or		1260~1650
		1310±40		1310±40

Test Wavelength	nm	850 / 1310				1310/1550,1260~1360,1510~1610

Insertion Loss 1, 2	dB				Max:1.4

Return Loss 1, 2	dB				MM ≥ 35	SM ≥ 55

Crosstalk 1	dB				MM ≥ 35	SM ≥ 55

PDL	dB				≤0.1

WDL	dB				≤0.30

Repeatability	dB				≤±0.02

Operating Voltage	V				3.0 or 5.0

Durability	Cycles				≥ 10 Million

Switching Time	ms				≤10

Optical Power	mW				≤500

Operating Temperature	℃				0 ~ +70

Storage Temperature	℃				-40 ~ +85

Relative Humidity	%				5 ~ 95

Dimension	mm		(L)26.0×(W)25.5×(H)10.3 or Customer design

Note: 1. Within operating temperature and SOP.
2.Excluding Connectors.

Pin Configurations

Type	State		Electric Drive				Status Sensor

1×4		Pin 1	Pin 5	Pin 6	Pin 10	Pin 2-3	Pin 3-4	Pin 7-8	Pin 8-9

Latching	0(Reset)	GND	GND	GND	V+	Close	Open	Open	Close

	1(Set)	V+	GND	GND	GND	Open	Close	Close	Open
	1(Set)	V+	GND	GND	GND	Open	Close	Close	Open

Non-	0(Reset)	---	---	---	---	Close	Open	Open	Close
latching
latching	1(set)	V+	---	---	GND	Open	Close	Close	Open

Ordering Information:

Fiber Type	Voltage	Switch type	Test Wavelength	TubeType	Fiber length	Connector

SM:SM,9/125	3:3V	L:Latching	850:850nm	25:250um	05:0.5m±5cm	FP:FC/PC,FA:FC/APC

M5:MM,50/125			1310:1310nm	90:90um	10:1.0m±5cm	SP:SC/PC,SA:SC/APC

M6:MM,62.5/125	5:5V	N:Non-latching	13/15:1310/1550nm	X:Others	15:1.5m±5cm	LP:LC/PC,LA:LC/APC

X: Others			X:Others		X:Others	OO:None,X:Others