330104-04-09-10-01-05 Bently Nevada Armored 3300 XL 8 Mm Proximity Probe For Measuring Shaft Vibration
Price:
inquiries
MOQ:
1
Delivery Time:
2-3 work days
Brand:
Bently Nevada
Product Description
330104-04-09-10-01-05 Bently Nevada Armored 3300 XL 8 Mm Proximity Probe For Measuring Shaft Vibration
The Bently Nevada 330104-04-09-10-01-05 is a heavy-duty, stainless-steel armored metric proximity probe specifically engineered to measure dynamic shaft vibration and axial thrust on critical high-speed rotating machinery. It solves the costly industrial pain point of physical cable severing and signal crushing caused by flying metal debris or rough handling during intensive machine turnarounds. Compared to standard unarmored sensors, this model encapsulates its internal coaxial line in a flexible, ruggedized armor conduit, providing an exceptionally stable 2.0 mm (80 mil) linear sensing range that is completely shielded from physical impacts and corrosive fluid submersion. It is the gold standard for API 670 compliant machinery protection loops in heavy-industrial zones.
Automation Engineer's Note
"When replacing a 330104-04 probe during a machine outage, pay close attention to the 40mm unthreaded portion of the barrel. This smooth forward body is designed to bypass thick outer walls smoothly, but you must confirm your internal bracket allows the remaining 50mm of threaded body to fully engage for secure gapping. Always use a digital multimeter on the Proximitor's terminal to set your target gap at exactly -10.0 Vdc (roughly 1.0 mm of physical space) to anchor the sensor dead-center on its linear curve. Because this model includes heavy armor, make sure to anchor the armor conduit with proper clamps near the junction box exit to prevent its weight from tugging on the internal ClickLoc connector joint."
Tailored Product FAQ
Q: Does the stainless steel armor backing make the cable completely rigid or difficult to route?
Not at all. Bently Nevada designs this armor conduit using an interlocked, flexible stainless steel wrapping technique. It provides extreme crush and cut resistance against falling tools or industrial debris while maintaining a highly workable bend radius, allowing your maintenance crew to route the cable easily through tight electrical conduit bends.
Q: Can this 330104-04 armored metric probe be hooked directly to an unarmored extension cable?
Yes, it can. The protective armor sleeve encases the probe's internal coaxial wire lead up to the connector tail. As long as you are matching it with a standard 3300 XL 8mm extension cable of the correct total system length (typically balancing to a 5-meter or 9-meter total system), the electrical impedance remains perfectly matched whether the extension cable is armored or unarmored.
Q: What is the main structural benefit of choosing a 40mm unthreaded length option over a fully threaded probe?
Fully threaded probes are prone to binding or collecting carbon sludge in their threads when passing through long, dirty machine casing holes. The 40mm unthreaded forward tip glides cleanly through the outer access bore without friction, meaning your technicians only have to spin and thread the rear portion of the probe, making installation and exact gap adjustment significantly faster.
Recommended Model
| 3300/50-02-01-00-00 | 2201/03-01 | 1800/20-XX-90-02-00 MOD 158611-01 |
| 3300/50 | 21747-080-00 | 177230-02-01-05 |
| 3300/47 | 21505-00-12-05-02 | 177230-01-02-05 |
| 3300/45 | 200350-02-00-CN | 177230-01-01-05 |
| 3300/35 | 190501-04-00-00 | 170180-01-05 |
| 3300/20 | 1900/65A 172323-01/1900/65A 167699-02 | 16925-15 |
| 3300/16 | 1900/65A 172323-01 1900/65A 167699-02 | 16710-20 |
| 30190-035-00-00 | 1900/65 | 16710-14 |
| 2300/20-02 | 1900/55 | 16710-10 |
| 2300/20-00 | 18622-030-01 | 16710-06 |
The Amikon Benefit
- 100% Original
- Factory Sealed
- Lowest Lead Times
Global Distribution Network
Amikon supplies industrial automation parts to more than 150 countries, covering a wide mix of regions.
- The Americas: Especially the USA and Canada, still rely quite a lot on replacement parts. Many sites there are older facilities like refineries or chemical plants.
- Europe: Similar, with countries such as Germany, UK, France and Italy. A lot of work there is about keeping existing systems running rather than new installations.
- Asia-Pacific: Includes China, Japan, South Korea, Singapore and Australia. Industries there range from semiconductors to shipbuilding and mining, depending on the country.
- Middle East and Africa: Like UAE, Saudi Arabia, Qatar and South Africa, are more focused on energy-related operations, mainly oil, gas and power sectors.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
MOORE AUTOMATION LIMITED
Location
32D floor ,GuoMao building , Hubin South Road, Siming District,Xiamen City，Fujian Province，China.
Contact Person
Miya