Plastic Table Moulding Machine Single Station Speed Control
plastic bus seats chairs tables making machine blow molding machine TDB-80F
Extrusion blow molding machine technical feature:
The electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable.
The hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable.
The plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform.
The speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable.
The opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.
Blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision products.
Extrusion blow molding machine installation, commissioning and training:
If the buyer needs seller to send technicians to workshop for supervising the erection and start-up, seller must support and send sufficient number of technicians and keep duration of stay in workshop. Usually it's about 3~5 days in this duration. The first day is that when our technician is at the airport to factory of buyer. And from the first day, the buyer has to pay US$80 per day. And all accommodation, visa application & air ticket will be born by the buyer.
Extrusion blow moulding machine specification:
| Model | TDB-80F | |
| Station | Single station | |
| Max. Product Volume | (L) | 80L |
| Dry cycle | (pc/h) | 360 |
| Screw Diameter | (mm) | 100 |
| Screw L/D ratio | (L/D) | 25 |
| Screw drive power | (KW) | 45 |
| Screw heating capacity | (KW) | 8.4~10.5 |
| No. of heating zone | (ZONE) | 4 |
| Max.Output of HDPE | (Kg/hr) | 160~200 |
| Oil pump drive power | (KW) | 37 |
| Clamping force | (KN) | 440 |
| Mold stroke (Platen distance) | (mm) | 500~1200 |
| Max. Size of Mold(W*H) | (mm) | 800*1000 |
| Capacity of the diehead | (L) | 12.8 |
| Max. Die diameter | (mm) | 420 |
| Die heat capacity | (KW) | 9.2 |
| No. of heating zone | (ZONE) | 5 |
| Blowing pressure | (Mpa) | 0.8 |
| Air volume | (M3/MIN) | 1.2 |
| Cooling water pressure | (Mpa) | 0.3 |
| Water consumption | (L/MIN) | 100 |
| Size of machine ( L*W*H) | (m) | 5.42*2.45*3.9 |
| Weight of machine | (TON) | 16 |
Components:
a) Hydraulic Parts
| Name | Supplier |
| Oil Pump | PARKER or SUNNY, America |
| Valve | YUKEN or SUNNY |
| Hose, Joint | PARKER SIR |
| Sealer | Top DZ Europe |
b) Electrical Parts
| Name | Supplier |
| Microcomputer Control System | MITSUBISHI PLC, Japan |
| Touch Screen | HITECH color screen, Taiwan |
| Temperature Controller | MITSUBISHI, Japan |
| Conductor | SCHNEIDER |
| Air Switch | SCHNEIDER |
| Motor | SIMENS BEIDE Asynchronous Motor |
| Power Resource | MEAN WELL, Taiwan |
| Inverter | MITSUBISHI |
c) Pneumatic Parts
| Name | Supplier |
| Solenoid Valve | FESTO, Germany |
| Cylinder | FESTO, Germany |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.