20mic - 80mic PETG Shrink Film For Sleeves , Tamper Evidence , Extruded Roll Stock
20mic - 80mic PETG Shrink Film For Sleeves , Tamper Evidence , Extruded Roll Stock
PETG Shrink Film Details:
POLYESTER(PETG) considered as a kind of ester film met friendly environment is mainly used to pack with PET containers or bottles, it can cut down recycling cost. PETG shrink film is available for a variety of packaging types, sleeves, tamper evidence, extruded roll stock, shrink bags or cap seal according to customers' size.
PETG Shrink Film Specifications:
1. Thickness: 20mic - 80mic
2. Width: 150mm - 1000 mm
3. Length: 2500m - 5000m
4. The shrinkage: 60% - 70%
5. Can provide free samples of 150m - 200m.
PETG Shrink Film Parameter:
| No | Test Item | UNIT | Standard | Test Result | Decide | |||
| 1 | (Average thickness deviation) | μm | ±3 | 0 | Qualified | |||
| 2 | TENSILE STRENGTH | (MD) | MPa | ≥42 | 65.8 | Qualified | ||
| (TD) | MPa | ≥142 | 231 | |||||
| 3 | ELONGATION | (MD) | % | ≥300 | 591 | Qualified | ||
| (TD) | % | ≥35 | 55 | |||||
| 4 | (Elasticity Modulus) | (MD) | MPa | ≥1500 | 3269 | Qualified | ||
| (TD) | MPa | ≥3000 | 7370 | |||||
| 5 | HEAT SHRINKAGE | (MD) | % | ≤5.0 | 2.3 | Qualified | ||
| (TD) | % | 60～70 | 66 | |||||
| 6 | (HAZE) | % | ≤7.0 | 2.2 | Qualified | |||
| 7 | C.O.F | (IN/OUT) | dynamic friction coefficient | / | ≤0.50 | 0.47 | Qualified | |
| 8 | WETTING TENSION | mN/m | ≥38 | ≥38 | Qualified | |||
| 9 | Density | g/cm3 | 1.32±0.3 | 1.46 | Qualified | |||
PETG Shrink Film Application:
1. Widely for all types of bottles, cups, trays printing;
2. Used for making full body sleeves and containers;
Storage:
1. The film are suggested to be stored in the warehouse with temperature below 23℃, if in hot
season, putting on airconditioning or other solution to cool down the warehouse shoud be taken.
2. The film storage period is 3 months. Please try to use up film within 3 months while they are at perfect
conditon.
Attention:
1. Over the sea: The films are suggested to be shipped with reefer container. If less than container
loading, anti-heat material is advised to be used for packing to protect the films.
2. Container over the land: The truck with electronic power should be used for moving the container
between port and factory to keep the reefer container working.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.