IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage
IEC 62196-1 Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus
Product Information For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus:
This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque.
It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc.
Principle For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus:
Pull is realized by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved by releasing the torque weight by air cylinder.
Technical Parameters For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus:
| Operation Method | Button operation |
| Drive Mode | Motor and cylinder |
| Pull Force Weights |
One set of pull force weights Can achieve 160N, 200N, 240N, 250N,500N, 600N |
| Torque Weights |
One set of torque weights Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m |
| Torque Arm | R100mm(Ф200mm) |
| Pull Frequency | 1cycle/s |
| Pull Cycles | 1-9999 cycles, can be preset, default 100 cycles |
| Torque Applied Time | 0-99H59M59S, can be preset, default 1min |
| Fixture | One set of universal fixtures |
| Equipment Dimensions & Weight | W1600*D500*H1200mm, the whole machine is about 150Kg |
| Power Supply | Single phase AC220V±10%, 60Hz, 10A |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.