KP-368H Telephone Ringing Signal Tester GB4943.1 IEC62368-1
Product Specifications
| Standards |
GB4943.1-2022 Appendix H, IEC62368-1:2018 |
| Sampling module bandwidth |
200MHz |
Product Overview
The KP-368H Telephone Ringing Signal Tester is a specialized test instrument designed for electrical safety testing. It accurately simulates telephone network environments to evaluate telephone ring signals, featuring two built-in test methods (Method A and Method B). Compliant with international standards GB4943.1-2022 and IEC62368-1:2018, this tester verifies whether measured currents or voltages meet standard requirements under various operating conditions.
The instrument features an integrated industrial control host with built-in oscilloscope measurement module and real-time waveform display interface. This intuitive design provides clear visualization of operating parameters and instrument status. With its excellent performance, high reliability, and cost-effectiveness, the KP-368H is the preferred choice for electrical safety testing laboratories and electronics manufacturers.
Technical Specifications
| Technical Parameter |
Specification |
| Comply with standards |
GB4943.1-2022 Appendix H, IEC62368-1:2018 |
| Sampling module bandwidth |
200MHz |
| Sampling rate |
1Gsa/s |
| Sampling accuracy |
±2% of reading |
| Range |
250V(RMS) |
| Method A measurement parameters |
- Fixed resistance: 5000Ω, 100W, 1% accuracy
- Average current I TS1 measurement of a single working ringing cycle
- Average current I TS2 measurement of one ringing rhythm cycle
- Average current ITS1 and ITS2 measurements of continuous ringing signal under single fault condition
|
| Method B measurement parameters |
- Fixed resistance: 1MΩ, 100W, 1% accuracy
- Fixed resistance: 5000Ω, 100W, 1% accuracy
- Ringing signal peak-to-peak voltage measurement
- Peak voltage measurement to ground
- DC voltage measurement to ground
- Peak-to-peak current measurement of continuous ringing signal under single fault condition
|
| Disconnect device |
Variable resistor: 500-2000Ω, step 100Ω |
| Peak-to-peak current measurement |
Monitor voltage |
| Input power |
AC 220V±10%,50Hz/60Hz |
| Dimensions |
600*500*280mm |
| Weight |
About 15 kg |
Frequently Asked Questions
What is the KP-368H Telephone Ringing Signal Tester?
The KP-368H is a specialized test instrument for electrical safety testing that simulates telephone network environments and evaluates telephone ring signals. It includes two built-in test methods (Method A and Method B) and features an integrated industrial control host with a built-in oscilloscope for real-time waveform display. It's designed for intuitive operation, high reliability, and cost-effectiveness, making it ideal for electrical safety labs and electronics manufacturers.
What standards does the KP-368H comply with?
The tester strictly adheres to international standards GB4943.1-2022 (Appendix H) and IEC62368-1:2018, ensuring accurate simulation of telephone communication equipment under various conditions to verify if currents or voltages meet safety requirements.
How does the KP-368H ensure user-friendly operation?
It features an integrated industrial control host with a real-time waveform display interface and built-in oscilloscope module, allowing easy configuration of parameters and clear visualization of instrument status. The design prioritizes simplicity, making it accessible for electrical safety testing in labs and production environments.
![KP-368H Telephone Ringing Signal Tester]()
