IEC61851-1:2017-02 Compliant Impact Current Tester with 30A Rated Current and 100µs Measurement Time
Price:
To be quoted
MOQ:
1
Delivery Time:
Negotiable
Brand:
Kingpo
Product Description
YL300A Impact Current Tester
The YL300A Impact Current Tester is manufactured in compliance with IEC61851-1:2017-02 requirements for electric vehicle conductive charging systems. This PLC-controlled equipment with touch screen interface meets ISO 17409:2015 standards for withstanding surge currents in AC electric vehicle supply equipment.
Key Features
- Manufactured to IEC61851-1:2017-02 standards
- PLC + touch screen control system
- Withstands peak current of 230A for 100µs duration
- Handles 30A (RMS) for subsequent 1 second period
- Compatible with testing per IEC TS 61439-7
Technical Parameters
| Parameter | Specification |
|---|---|
| Power Supply | Single-phase 220V/50HZ |
| Sample Voltage | Three-phase 380V (user-provided) |
| Peak Current | 230A (100µs duration) |
| Rated Current | 30A (RMS) |
| Current Measurement | Within 100µs after power off |
Control Panel Features
Control Panel Layout
- Touch Screen: Parameter setting and monitoring
- Start/Stop Buttons: Machine operation control
- Emergency Stop Switch: Immediate shutdown capability
- Power Switch: Main power control
- Comprehensive Electricity Meter: Displays load voltage, current and power factor
Front Panel Components
Front Panel Components
- Power switch
- Three-phase line sequence test clip
- Multiple standard gun mounts (National, American, European)
- Standard sockets (16A and 50A configurations)
Operation Instructions
Initial Setup
1. Connect the sample to the dedicated test port
2. Connect power supply to load output terminal
3. Connect oscilloscope to monitor electrical signals
Power On Operation
Test Interface Display
- L1, L2, L3: Three-phase power supply status indicators
- Start/Stop/Emergency controls with visual indicators
- Test cycle counters with reset capability
- Manual switches for trigger signals and load resistors
Parameter Configuration
Parameter Setting Interface
- Configurable test cycles and timing parameters
- Phase-specific testing options (Auto/Manual modes)
- Precise delay timing controls for various operations
Current Adjustment Procedures
1. Manual resistance adjustment for initial current setting
2. Automatic resistance fine-tuning for precise current values
3. Compensation operation for final current calibration
Current Adjustment Interface
230A Peak Current Testing
1. Proper resistance and capacitance configuration
2. Waveform observation and adjustment
3. Recipe saving for repeatable tests
Note: The unit comes pre-configured with 230A current formulas (0-3). After product connection, simply activate switches S2/S3 and press Start to initiate inrush current testing.
Test Execution
1. Load pre-configured test formula
2. Activate S2/S3 switches for current path
3. Initiate test sequence via Start button
4. Automatic completion after preset test count
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
KingPo Technology Development Limited
Location
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact Person
Lynette Wong