UL 719 Compliant Abrasion Resistance Tester for Flat Cable Jacket with 30 Cycles per Minute and 6 Inch Stroke
Price:
To be quoted
MOQ:
1
Delivery Time:
35 working days
Brand:
Kingpo
Product Description
UL 719 Abrasion Resistance Tester of Jacket on Flat Cable
Technical Parameter
|
Test station |
6 station |
|
Control method |
PLC+ touch screen |
|
Drive mode |
Servo motor |
|
Control |
PLC+ touch screen |
|
Moving distance |
150mm |
|
Moving speed |
30 times per minute |
|
Number of runs |
0 to 9999 can be se |
|
Weight |
13.34±0.14N ,6 pieces |
|
According standard |
UL719-Clause 7.14 |
|
Equipment size |
1320*660*1250mm |
|
Equipment weight |
100kg |
|
Power supply: |
AC220V±10%/50-60Hz |
Abrasion Resistance Test Procedure
7.14.1 Specimen Preparation:
- Cut six straight untwisted specimens (15 inch/380 mm) from finished cable
- Lay specimens flat and parallel on a horizontal steel plate
- Secure each specimen at both ends
- Position abrasion tool (weighted steel cylinder with three parallel teeth) above each specimen center
- Align tool teeth perpendicular to specimen axis
7.14.2 Test Execution:
- Reciprocate specimen plate horizontally at 30 cycles/minute
- Use simple harmonic motion parallel to specimen axes
- Center stroke on abrasion tools (6 inch/150 mm length)
7.14.3 Test Monitoring:
- Begin test with plate at stroke end and counter at zero
- Apply weight to each tool (3 lbf ±0.5 ozf / 13.34 ±0.14 N)
- Lower tools gently onto specimens and begin reciprocation
- Continue until jacket penetration or 70 complete cycles
- Operator must monitor wear, clear debris, and record penetration cycles
Note: Test complies with UL 719 standard for evaluating jacket abrasion resistance on flat cables.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
KingPo Technology Development Limited
Location
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact Person
Lynette Wong