ISO 16750-4 Compliant IP Testing Equipment for Thermal Shock and Splash Water Testing with 100 Cycles and PLC Controller
Price:
To be quoted
MOQ:
1
Delivery Time:
7 working days
Brand:
kingpo
Product Description
ISO 16750-4 Compliant Thermal Shock & Splash Water Testing Equipment
Advanced testing equipment designed for thermal shock and splash water testing of electronic components in compliance with ISO 16750-4 standards.
Test Purpose & Methodology
Purpose
Simulates component exposure to splash water during driving through puddles, verifying functionality when exposed to abrupt cooling by water.
Operating Modes
- Non-operating components: Continuous operation during entire test
- Operating components: Intermittent operation during working condition driving
Test Procedure
Heating of Device Under Test (DUT) to specified temperature followed by cyclic splashing across entire width as per standard specifications.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | KP-IW16750A |
| Studio Size | 1300*900*900mm (D*W*H) |
| Test Samples Maximum | 700*700*500mm |
| Maximum Load Bearing | 150kg |
| Temperature Range | RT+10℃～200℃ |
| Temperature Fluctuation | ±2℃ |
| Temperature Deviation | ±2℃ |
| Test Hole | Φ100mm |
| Power | AC380V 50Hz 25kw |
| Control System | PLC Electric Control |
| Operation Interface | 7 inch color touch screen |
| Test Model | Splash water test |
| Test Cycle | Default 100 cycles, 0-9999 preset |
| Splash Duration | 3s |
| Splash Water Temperature | 0-4°C |
| Water Flow | 3-4L/3s |
| Nozzle to DUT Distance | 300-350mm |
| Splash Water Orientation | Single-direction or rotation mode |
| DUT Heating | Heating system |
Structural Design Features
- 2mm high-quality galvanized steel casing with spray finish
- SUS316 stainless steel mirror panel liner with funnel bottom design
- High-density fiberglass insulation for temperature stability
- Multi-layer tempered glass observation window
- Stainless steel multi-wing impeller mixing system
- Double-layer high-temperature sealing strips
- Stainless steel inner door with ergonomic handle
- External test port (100mm aperture)
- French Taikang brand compressor refrigeration system
- PU movable wheels with locking casters
- Right-side control panel with temperature controller
Equipment Usage Conditions
- Ambient temperature: 5°C to +32°C
- Ambient humidity: ≤85%
- Power requirements: AC380 (±10%) V / 50HZ three-phase five-wire system
- Pre-installed capacity: approximately 3KW
Splash Water Test Methodology
Heat DUT in hot air oven at Tmax for specified holding time, then splash with ice water for 3 seconds. Splash direction and width accommodate actual vehicle installation conditions.
Test Parameters
- Number of cycles: 100
- Holding time at Tmax: 1 hour or until DUT temperature stabilization
- Transition duration: <20 seconds
- Test fluid: De-ionized water
- Water temperature: 0°C to +4°C
- Water flow: 3-4 liters per 3 seconds
- Jet to DUT distance: 325±25 mm
- DUT orientation: As installed in vehicle
Packaging
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
KingPo Technology Development Limited
Location
RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact Person
Lynette Wong