60micron collision wrap film small size cutted

Description

Self Adhering Collision Wrap Film For Damaged Vehicles used to Protect a damaged vehicle’s interior from exposure to the elements during temporary outdoor storage with Autobody Weather Barrier Film.
Durable 3 mil puncture resistant plastic film with UV inhibitor.
Clear see-through plastic film.
Adheres to clean and dry surface – metal, glass & plastic.
Use on vehicle exterior surfaces for protection up to 6 months

Usages

1. On vehicles stored temporarily outdoors awaiting repair

2. On vehicles brought outdoors from indoors during phases of repair.

3. On vehicles inside shops when conditions create excessive dust or dirt than can inhabit interior of vehicle.

4. Where vehicle is temporarily stored and vehicle interior is exposed to risk of damage by rain, wind, snow, dirt, etc. outdoors or indoors!

5. Towing vehicle from nearby damage site.

6. Temporarily storing vehicle on lot.

Application Directions 

1. Surface should be clean and dry.

Note: Collision Wrap Film must be applied on a dry surface. Once applied it resists wetness of all precipitation.

2. Pull a 2” starter edge from length of roll and press down against surface.

3. Gripping the roll begin unwinding the Collision Wrap film across and over the damaged area.

4. Press film down across overall area being cautious of glass shards, torn metal and rough surfaces.

Note: Do NOT apply Collision Wrap over uncured coatings.
5. Do NOT apply Collision Wrap over wet surfaces. (Moisture/condensation marks could occur.)

Our Services

1, 24 hours Timely respond and online contact is available.
2, All your questions Can be handle by professional sales.
3, Free sample.
4, Your business relationship with us will be confidential to any third party.
5, Good after-sale service offered.
6, Quality problems in full compensation.

Contacts

Sophie Liu
E-mail:Sophie@shire-plastic.com
Phone/Wechat/Whatsapp:+0086-13645832408

Skype:sophie679247