366-0168 3660168 C18 Engine Water Pump

Price Negotiable

Price: Please send mail or WhatsApp

MOQ: 1

Delivery Time: 1 Works day

Brand: JIAJUE

Product Description

366-0168 3660168 C18 Engine Water Pump

Product Overview

High-performance diesel fuel injection pump designed for reliable operation and optimal fuel delivery.

Product Specifications

Product Name	Water Pump
Part Number	366-0168
Brand Name	JIAJUE
Condition	Brand New
Availability	Rich Stock
Approximate Weight	11KG
Size (for 1pc)	40cm x 40cm x 40cm
Delivery Methods	DHL FedEx TNT UPS
Warranty	3 months
Shipment	Dispatched within 24-48 hours

Product Testing

Water pump testing procedure and quality control

Water pump performance testing and validation

Related Products

Related diesel fuel injection pumps and components

Frequently Asked Questions

How do I install my Fuel Injection Pump after purchasing it?

Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains very detailed installation instructions for how to install the 387-9427 injection pump.
What precautions should I take before installing my Fuel Injection Pump?

System Flushing is crucial! Before installing the new pump, the entire fuel system (tank, lines, and rail) must be cleaned to remove metal debris from the old failed pump.
Does this pump include the Solenoid Valve?

Yes, our 319-0677 comes fully assembled with a pre-tested solenoid.
Is my machine compatible with this part number of Fuel Injection Pump?

If you're not sure if this fits your machine, please send us your Engine Serial Number (ESN) for free verification.
How long will it take to receive my package after I make the payment?

This depends on your country and region, and the customs clearance time in your country. Please feel free to contact us and send us your address and postal code so we can check shipping costs and estimate delivery time for you.

Step-by-Step Installation Guide

Pro-Tip: Since the pump works within the HEUI system, ensure your engine oil is fresh and of the correct viscosity (e.g., 15W-40). Dirty oil will cause the pump to fail prematurely as it relies on oil pressure to actuate.

System Decontamination (System Flush)

Before removing the old pump, drain and flush the fuel tank and fuel lines. Metal shavings from a failed pump can circulate and instantly destroy your new unit.
Inspect the Transfer Pump & Filters

Replace both the primary and secondary fuel filters. Ensure you use high-efficiency (2-micron) filters. Inspect the fuel transfer pump for wear; if it's weak, the high-pressure pump won't receive enough fuel.
Oil Quality Check

Change the engine oil and oil filter. HEUI pumps use engine oil to create high-pressure fuel injection. Dirty or incorrect viscosity oil (e.g., using 10W-30 instead of 15W-40 in high temps) will cause immediate performance issues.
Lubrication on Install

Apply clean engine oil to the O-rings and the pump drive gear. Warning: Never dry-start. Fill the pump with clean diesel through the inlet before connecting the lines.
Torque Sequence

Tighten the mounting bolts in a cross-pattern to the manufacturer's specified torque (refer to C7/C9 service manual).

Troubleshooting Guide

Issue	Possible Cause	Solution
Engine Won't Start	Air trapped in the fuel lines	Bleed the fuel system thoroughly.
Low Fuel Pressure	Clogged fuel filters or a leaking SCV (Suction Control Valve)	Replace filters; inspect the SCV for debris.
Black Smoke / Power Loss	Contaminated fuel causing plunger wear	Drain fuel tank; use high-quality diesel.
Loud Knocking Noise	Improper timing or loose mounting bolts	Re-calibrate the timing and check bolt torque.