Oval Galvanized Steel Wire For Cattle , Aircraft Grade Wire Rope With Lasting Strength
Oval Galvanized Steel Wire
Galvanized Wire is for cattle fence in South American Area.
Additional Info
Diameter:
|
wire gauge size |
SWG(mm) |
BWG(mm) |
J. de p |
|
12 |
2.64 |
2.77 |
1.8 |
|
13 |
2.34 |
2.41 |
2.0 |
|
14 |
2.03 |
2.11 |
2.2 |
|
15 |
1.83 |
1.83 |
2.4 |
|
16 |
1.63 |
1.65 |
2.7 |
|
17 |
1.42 |
1.47 |
3.0 |
|
18 |
1.22 |
1.25 |
3.4 |
|
19 |
1.02 |
1.07 |
3.9 |
|
20 |
0.91 |
0.89 |
4.4 |
|
21 |
0.81 |
0.813 |
4.9 |
|
22 |
0.710 |
0.711 |
5.4 |
|
23 |
0.6096 |
0.6347 |
5.9 |
Galvanised Wire Working Specifications
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.
|
Nominal Diameter |
Minimum Coating Mass (g/m2) |
||
|
Standard Galv. |
Heavy Galv. |
Extra-highGalv. |
|
|
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.45mm * 5.25mm |
50 50 50 50 35 |
90 90 90 90 50 |
230 230 230 230 230 |
Tensile Strength (Mpa)
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
|
Nominal Wire Diameter |
Bread Loading (kgf) |
||
|
Standard Galv. |
Heavy Galv. |
Extra-highGalv. |
|
|
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.55mm * 5.25mm |
600 600 600 600 600 |
800 800 800 800 800 |
870 870 870 870 870 |
|
Nominal Wire Diameter |
Packing (meter) |
||
|
1 |
2 |
3 |
|
|
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.55mm * 5.25mm |
500 500 500 500 500 |
1000 1000 1000 1000 1000 |
1200 1200 1200 1200 1200 |
Steel Chemistry
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
|
Tensile Grade |
% Carbon |
% Phosphorus |
% Manganese |
% Silicon |
% Sulphur |
|
Normal |
0.45~0.50 |
0.032 |
0.5 ~1.00 |
0.10~0.34 |
0.041 |
|
High |
0.59~0.63 |
0.035 |
0.5 ~1.10 |
0.10~0.35 |
0.045 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.